Assets Available for Sale

Major Shipyard and Fabrication Asset Sales

Under Instructions from BAE Systems


Starts

Thu
15
Jun

Ends

Fri
29
Dec

15 June - 29 December 2017


Expressions of Interest Close

4:00pm (AEDT)

Enquiries

Lee Pulbrook

0499 993 285
lee@tigerassetgroup.com

Matt Travess

0499 072 388
matt@tigerassetgroup.com


Location

Nelson Place

Williamstown VIC 3016

View Map

Inspection

By Appointment with Project Managers


Collection

By Appointment with Project Managers

Shot Blast and Painting Facility

  • Freestanding building (approximately 30m x 42m), all bolted steel construction, steel sheet clad, main roller entry approx. 18m (W).
  • Blast and paint chamber (approximately 23m x 25m), with 2 rubber belt conveyors, grit collection to chamber sides
  • Heated air systems comprising Aira GHD4500 gas fired heater
  • Fan unit (approximately 2m diameter), powered by WEG 415V 220kW motor
  • 2x Air extraction units & manifold to side to chamber
  • 3x dust extraction units
  • 3x Chambers, 4x pulse/chamber with twin collectors to bottom, pipework and exhausts;
  • 3x 2010 Compair L250-10A Air Compressors;
  • 3x  Compair F780CS+ Refrigerant Air Dryers;
  • All Electrical, Plumbing and Control Systems;
  • Burwell Dust Extraction Unit;
  • 6.6kVA Transformer
  • Grit Recovery System Comprising:
    • Rubber belt conveyors to chamber sides, approximately 28m(L)
    • Bucket elevator, approximately 10m (H)
    • 2x Vacuum collection chambers and hose
    • Main heavy grit recovery site
    • Pressurised grit delivery vessel
    • 2x Munkebo medium grit recovery cyclones and Mukeso fine grit recovery motorised extraction cyclone
    • Dust extraction unit, 2 Pulse, Single bay collector
  • Breathing Air System comprising:
    • Compair D50 HSR Air Compressor
    • Compair F133CT Air Drier and Air receiving tank
    • (Subject to a 6.5% + GST Buyers Premium)

General Layout Drawings Available Here

Component Drawings Available Here

IMG Welding Line

  • 1x Fillet welding gantry, 13.2t, fitted with 4x Kemppi KempArc DT400 welding heads, Rexroth pneumatic positioning rams, 2x integrated Abus pendant control electric chain hoists
  • 4x Positioner / Track Gantries, each 7.5t, fitted with 500kg SWL positioner clamp & pendant controls
  • 4x Kemppi 415V welding power supplies
  • Gantry Span approximately 10m
  • Overall bed size approx 6.4m x 65m (in 12 sections)
  • Complete with Rail, Controls, Fume Extraction and Work Piece Stillages
  • (Subject to a 6.5% + GST Buyers Premium)

Click here to view IMG Fillet Welding Track Operating Manual

Click here to view IMG Positioner Track Gantry Operating Manual

HGG PCL 600 High Production Profile Cutting Line

The PCL is a Profile Cutting Line that is developed to cut stiffener profiles used in the ship building industry. This machine is equipped with a robot which is capable of full three-dimensional cutting. This means that all cuts can have a bevel and/or angularity. Comprises:

  • Part loading in-feed conveyor system
  • Integrated edge cleaning line / Shot blast station
  • Conveyor and accumulation section
  • Profile cutter, The closed cutting cell includes inside noise absorption material to reduce noise outside the cutting cabin. Provides a clear overview for the operator. Features on-the-fly measuring & fume extraction
  • Multipe outfeed stations, Slatbelt with outfeed table for small parts and roller conveyor with chains for long parts
  • Complete with all controls & air receiving tank
  • max: 150 x 150 mm (6” x 6”) equal angle cutting
  • max: 550 x 150 mm (22” x 6”) unequal angle cutting
  • max width: 550 mm (22”) flat bar cutting
  • Capable of cutting lengths up to 12m Long
  • (Subject to a 6.5% + GST Buyers Premium)

Click here to view HGG Profile Line Layout Plan

Click Here to see Shot Blast Cell Manual

Click Here to see Plasma Cutting Unit Instruction Manual

Click Here to see PCL600 Cutting Calibration

Farley Laserlab Trident Profile Cutter

  • Single plasma cutting head
  • 2x oxy-acetylene cutting heads
  • 2x Anderson Engineers water cutting beds, each approximately – 14m x 7.5m
  • Complete with Hypertherm HPR260 Plasma Power Supply, Matthews Jet A Mark 8400e inkjet controller and control cabinet
  • (Subject to a 6.5% + GST Buyers Premium)

Click Here to see Operating Manual

Click Here to see Maintenance Manual

(SOLD)

Abrasive Blasting Service and Supplies Blasting Room

  • Chamber approximately 6.0m x 4.4m internal
  • Full width twin doors
  • Internal lighting
  • Side access door
  • Bolted panel construction
  • Underfloor grit/dust collection with 3 conveyors
  • 1x Grit collectiohn hopper with 2x blasting pots & twin dust collection bags powered by 415V 22kW motor
  • 1x Dust collection hopper with twin bags powered by 415V 22kW motor
  • (Subject to a 12.5% + GST Buyers Premium)

Oliver Negative Pressure Spray Booth

  • Booth approximately 10.8m x 6.5m x 2.6m (h) internal
  • Dust collection & exhaust system
  • Internal lighting
  • Dual entry with double sliding doors & side access door
  • 6,700L/sec, 1,800L water tank capacity
  • Natural gas heating
  • Laser Electrical control board comprising spray booth and flash off booth controls
  • (Subject to a 12.5% + GST Buyers Premium)

Fujican Plate Roller

  • Approximate 12.5m operating width
  • Complete with roller infeed tables
  • Integrated Hydraulic system
  • Control console
  • Hydraulic load bank
  • 2x rear mounted 1T SWL swinging jib cranes
  • In built dual hoist delivery system
  • 4x twin powered drive rollers
  • Pit mounted, steel fabricated footings
  • Safety guard railing
  • Installed by ITL installation Pty Ltd
  • (Subject to a 12.5% + GST Buyers Premium)

(SOLD)

Caterpillar 800F Packaged Generator

  • CAT 3412STA V12 27L twin turbo diesel engine (s/n: 1EZ14279)
  • 880kW/1180HP at 1800RPM
  • 1000kVA rated power
  • 440/254V rated voltage
  • 60Hz rated frequency
  • 1320 amp rated current
  • 1,250 amp Main Switch
  • 1x 3 phase main switch (no socket outlets)
  • Capable of 415V @ 50Hz (currently set up as 440V @ 60Hz & 1312Amps)
  • Less than 100 hours (test & maintenance run only)
  • Skid frame base with integrated fuel tank
  • 11,320kg approximate mass
  • (Subject to a 12.5% + GST Buyers Premium)

2012 Link Belt RTC-8050 Series II All Terrain Crane

  • WLL 50,000 Kg
  • 4 section main boom
  • 2 section luffing boom
  • 5×25-20 ply rating tyres
  • Johnson Blocks ORJ40014RTB 40 Tonne block
  • LSI GS320 wind speed indicator
  • (Subject to a 12.5% + GST Buyers Premium)

Deer Park 70T Tracked Straddle Crane

  • Class 4
  • Main hoist SWL: 70T at 14.8m to 27m, 67T at 35m, 49T at 44m
  • Auxiliary hoist 1 SWL: 70T at 9m to 13.8m, 64T at 23m
  • Auxiliary hoist 2 SWL: 10T at 26 to 50.1m
  • DC electric hoist motors with Siemens drives
  • Electromechanical relay controls
  • Track width approximately 8m wide
  • Approximately 6m clear straddle width
  • 2x Siemens 400V 37.3kW electric drive motors
  • 6kVa transformer on board
  • (Subject to a 12.5% + GST Buyers Premium)

2x Deer Park 36T Tracked Straddle Cranes

  • Class 4
  • Main Hoist SWL: 36T at 18.5m, 20T at 29m
  • DC electric hoist motors with Siemens drive
  • Electromechanical relay controls
  • Track width approximately 8m wide
  • Approximately 6m clear straddle width
  • 2x Siemens 400V 23kw electric drive motors
  • Contactor box mounted under pier
  • (Subject to a 12.5% + GST Buyers Premium)

Gibb Miller Tracked Straddle Crane

  • Main hoist 6T max load
  • Auxiliary hoist 3T max load
  • Track width approximately 16m
  • Approximately 35m of travel across main gantry
  • Fitted with 2 tonne 32 head electromagnetic plate lift
  • (Subject to a 12.5% + GST Buyers Premium)

2012 Alimak Hek SE1600FC Materials Hoist

  • 1600kg/21 passenger capacity
  • 6 m/s operational speed
  • (Subject to a 12.5% + GST Buyers Premium)

(SOLD)

4x Kone Cranes 30T Overhead Travelling Gantry Cranes

  • Class C4 M5
  • 30T max capacity
  • Approximately 24m span
  • 2x 10T hoists & 1x 3T auxiliary hoist on each
  • Wireless remote controls
  • (Subject to a 12.5% + GST Buyers Premium)

(SOLD)

2x Kone Cranes 20T Overhead Travelling Gantry Cranes

  • Class C4 M4
  • 20T max capacity
  • Approximately 29.5m span
  • 2x 20T hoists & 1x 5T auxiliary hoist on each
  • Wireless remote controls
  • (Subject to a 12.5% + GST Buyers Premium)

4x TMC Dry Type Transformers

  • 6kV/960V
  • 2x 7.0kV/960V
  • (Subject to a 12.5% + GST Buyers Premium)

2x Thycon Frequency Convertors

  • 15,000kVA
  • 60Hz
  • (Subject to a 12.5% + GST Buyers Premium)

3x Quincy Air Compressors

  • 2x QGD315 with refrigerant dryer and filter
  • 1x QT51516 with refrigerant dryer and filter
  • (Subject to a 12.5% + GST Buyers Premium)

BUYERS PREMIUM

All Assets in this sale will be subject to a 6.5% or a 12.5% (excluding GST) Buyers Premium which will be added to the sale price of each asset.

TERMS & CONDITIONS

TIGER ASSETS GROUP’s standard Private Sale Terms & Conditions may be view by CLICKING HERE.

The final Terms & Conditions will be negotiated with successful purchasers. The highest or any offer may not necessarily be accepted.

Assets in listed in this sale are sold “as is, where is, with all faults, if any”

WORKPLACE HEALTH & SAFETY

Plant Hazard Reports will be available with the assets being sold.

TIGER ASSET GROUP advises all buyers that all plant offered for sale may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice.

Please Note:

  • Persons under the age of 18 years will not be permitted onsite.
  • Visitors must wear safety eyewear, high visibility vest, long sleeved shirt, long trousers and enclosed shoes at a minimum.

It is a condition of entry to site that all visitors comply with any directions given by TIGER ASSET GROUP staff or their representatives. Work carried out on this site must be completed in a manner compliant with all Workplace Health & Safety legislation and any site specific requirements.

Removal of some items in this sale will require the satisfactory completion of a Safe Work Method Statement by the buyer / buyers representative prior to decommission and removal being undertaken.

A copy of a typical Safe Work Method Statement Template can be found HERE.

CUSTOMER PICK UP

DELIVERY IS NOT AN OPTION FOR THIS SALE.

THE COLLECTION AND REMOVAL OF ITEMS IS THE BUYERS RESPONSIBILITY 

To collect your purchases, please make contact with the Project Manager to arrange a time.

COLLECTION TIME FRAME

Assets to be collected by appointment only.

Normal hours of operation are Monday to Friday, 7:00am – 4:30pm (AEST)

selling equipment

Contact Ben Roden for an obligation free, confidential consultation to discuss options that TIGER ASSET GROUP can offer for asset disposal and project management.

Ben Roden

Mobile: 0412 229 350

Email: ben.roden@tigerassetgroup.com

TIGER ASSET GROUP offers the following competitive sale strategies, each of which can be tailored to accommodate the specifics of your disposition needs.

• Live Auctions
• Webcast Auctions
• Online Auctions
• Sealed Bid Auctions
• Expressions of Interest Sales
• International Tender Sales
• Brokered Sales