Online Auction 19

Final Shipyard Sales – Paint & Blasting Assets, Plant Services, Portable Buildings & Shipyard Plant & Equipment

Under Instructions from BAE Systems


This Online Auction is being held on Pickles Online Auctions website

Starts

Thu
31
May

Ends

Tue
5
Jun

31 May - 5 June 2018


Online Auction Closed

2:00pm (AEST)

Enquiries

Lee Pulbrook

0499 993 285
lee@tigerassetgroup.com

Matt Travess

0499 072 388
matt@tigerassetgroup.com


Location

End of Nelson Place,

Williamstown Victoria 3016


Car park & Site entry via

Battery Road, Willamstown

View Map

Inspection

Monday 4th June 2018

From 8:00am to 4:00pm (AEST)


Please ensure you are wearing long pants & enclosed shoes


Collection

By Appointment Only Between Monday 18th and Friday 22nd of June 2018

From 7:00am to 3:00pm (AEST)

Unless An Agreed Appointment is made prior to this with the Project Manager / Vendor

Painting & Blasting Room Equipment

Packaged Air Compressor, Comp Air, L250-10A, manufactured: 01/2010, S/N: CD10001539001, 415V, 250kW, 1500RPM, 10 BAR, 38L3/min, 485 Amp full load current, Delcos 3100 control panel, showing 7288 hours

Packaged Air Compressor, Comp Air, L250-10A, manufactured: 01/2010, S/N: CD10001539002, 415V, 250kW, 1500RPM, 10 BAR, 38L3/min, 485 Amp full load current, Delcos 3100 control panel, showing 7897 hours

Packaged Air Compressor, Comp Air, L250RS-10A, manufactured: 01/2010, S/N: CD10001571001, 415V, 250kW, 1500RPM, 10 BAR, 36.86L3/min, 493 Amp full load current, Delcos 3100 control panel, approx. 7800 hours

Refrigerant Air Drier, Comp Air, F780CS+, S/N: 02-10-MA5305, ID No.: ZS1050635, 16 BAR max pressure, 4680 m3/hour nominal capacity, 12.4kW, R404A refrigerant, 415V

Refrigerant Air Drier, Comp Air, F780CS+, S/N: 02-10-MA5233, ID No.: ZS1050635, 16 BAR max pressure, 4680 m3/hour nominal capacity, 12.4kW, R404A refrigerant, 415V

Refrigerant Air Drier, Comp Air, F780CS+, S/N: 02-10-MA5306, ID No.: ZS1050635, 16 BAR max pressure, 4680 m3/hour nominal capacity, 12.4kW, R404A refrigerant, 415V

Packaged Air Compressor, Comp Air, D50HSR-10A, S/N: CD10001639001, Version 1, 415V, 50kW, 3700RPM, 10 BAR, 7.58L3/min, 95 Amp full load current, Delcos 3100 control panel, approx. 11,000 hours

Refrigerant Air Drier, Comp Air, F133CT+, S/N: 4409-MA8991, 16 BAR max pressure, 800 m3/hour nominal capacity, 1.8kW, R134A refrigerant, 415V

Vertical Air Receiver Tank, Pearson Cont Pty Ltd, PC-30829, manufactured: 05/2010, approx. 800mm diameter, 2800mm high, 1100kPA

3 x 3 Stage Vacuum Grit Recovery Units, Munkebo Clemco A/S, MB-3000E5, manufactured: 2010, 75kW, 3x 400V, 130A, comprising electric motor, vacuum pump, cyclone (approx. 1500mm diameter x 2000mm (h)), mounted on steel fabricated frame, including secondary cyclone (approx. 1200mm diameter x 3800mm (h)), mounted on steel fabricated frame, pipe work to be disconnected at first joint, approximate overall dimensions: primary- each approx. 900mm diameter x 3700mm (h) secondary- 3000 x 1500 x 2950mm (h), tertiary- 1800 x 1800 x 4800mm

2 x Bucket Elevator, approximate 18m, 1020 x 360mm, 415V

2 x Pressurised Grit Delivery Vessels with Overhead Feed Hopper, pressure vessel approx. 1800mm diameter x 3900mm, with air supply manifold

Vertical Air Receiver Tank, manufactured: 05/2010, approx. 1600mm diameter, 6600mm high, 1650kPA, 90 degrees Celsius, with Donaldson cartridge air filter

2 x Dust Extraction Unit, Amsack model R20 motorised actuator, integrated access platform & ladder, approx. overall 2500 x 1200 x 5200mm (h)

Large Extraction Fan, approx. 2000mm diameter inlet, WEG 220kW 415V motor

Industrial Gas Heater, Aria, GDH4500, manufactured: 2010, S/N: M1842, natural gas fired, 4320 MJ/hour gas consumption, 7kPA max inlet gas pressure, 12,000kW output, 415V

3 x Twin Dust Extraction Unit with 2 x Bagging chutes, Amsack model R20 motorised actuator, mounted on fabricated steel base, approx. overall 5650 x 2230 x 7000mm (H) 415V

2 x Extraction Fan, 1500mm diameter, axially mounted motor, 415V

2 x Rubber Belt Conveyors, PitTop Modular Conveyors, MR60 28M, approx. 600mm wide x 28m long, 15.8.20 drive, 1.5kW, manufactured 3/2010

Dust Extraction Unit Bagging Chute, Burwell Abrasive, Amsack model R20 motorised actuator, mounted on fabricated steel base with access platform and twin ladders, approx. overall 2400 x 2100 x 7000mm (H)

 

Power Generation Equipment

Qty 2x Backup Generators, Shinko, with Daihatsu V12 turbo diesel motors, 1900 kVA, 50 Hz, 166 A, includes 1x start-up compressor with Lister petrol motor and electric motor, 1x start-up compressor powered by 415V electric motor, 2x vertical air receiver tanks, electrical control cabinets. Note: one motor not in service – one piston removed, said to require new crank.

Compressors

Packaged Air Compressor with High Voltage Starting Cabinet, Quincy, QGD400H WC, manufactured: 12/2010, S/N: QT54516, 2578 CFM capacity, 70.3 m3/min, 116 PSI max, 400kW, 2980 RPM, dimension 4060 x 2310 x 2200mm (h), approx. 9,000kg, with Dong Lee Electric Manufacturing Co KYM28 high voltage starting cabinet, ABB protection relay with 6.6kV rackable vacuum breaker

Packaged Air Compressor with High Voltage Starting Cabinet, Quincy, QGD315H WC, manufactured: 12/2010, S/N: QT54545, 2136 CFM capacity, 60.5 m3/min, 355kW, 2980 RPM, dimension 4060 x 2310 x 2200mm (h), approx. 8,000kg, with Dong Lee Electric Manufacturing Co KYM28 high voltage starting cabinet, ABB protection relay with 6.6kV rackable vacuum breaker

Packaged Air Compressor with High Voltage Starting Cabinet, Quincy, QGD315H WC, manufactured: 12/2010, S/N: QT54514, 2136 CFM capacity, 60.5 m3/min, 355kW, 2980 RPM, dimension 4060 x 2310 x 2200mm (h), approx. 8,000kg, with Dong Lee Electric Manufacturing Co KYM28 high voltage starting cabinet, ABB protection relay with 6.6kV rackable vacuum breaker

Refrigerant Air Drier, MTA, MG 190/A, manufactured: 2010, S/N: 2200164526, 415V, 26kW, R407C refrigerant, 19 BAR LP/28 BAR HP max pressure, approx. 1102kg

Refrigerant Air Drier, MTA, MG 110/W, manufactured: 2011, S/N: 2200170886, 415V, 15kW, R407C refrigerant, 19 BAR LP/28 BAR HP max pressure, approx. 659kg

Refrigerant Air Drier, MTA, MG 110/W, manufactured: 2011, S/N: 2200170887, 415V, 15kW, R407C refrigerant, 19 BAR LP/28 BAR HP max pressure, approx. 659kg

Centrifugal Oil Free Air Compressor, Ingersoll Rand, C35MX2-2RH, manufactured 1994, 315kW, AV3 315 M102FS motor, S/N: 941804008, 2970 RPM with Ingersoll Rand PF1100 belt driven, 240V compressor

Air Conditioning Compressor, TemperZone, BD1250R

Air Conditioning Compressor, TemperZone, OSA405RKTV

Air Conditioning Compressor, TemperZone, OSA520RKTBV

Air Conditioning Compressor, TemperZone, OPA405RKTH

Large Capacity Vertical Air Receiving Tank, Pearson Coont P/L, Model PC-31513, (S/N: V9920407), TP1590 Kpa, WP1060 Kpa, Approx 1800 mm(Dia) x 5400mm (H), steel construction

Large Capacity Vertical Air Receiving Tank, (S/N: A155093), TP1100 Kpa, WP760 Kpa, MFD 1976, Approx 1500mm (Dia) x 4400mm (H), steel construction

Portable Buildings & Roof Structures

Transportable Office, Cougar, approx. 7.8m x 4.7m, single door, 2x windows to one side, full windows to 1 end wall, lighting

Portable Office, Commander, approx. 24m x 6m, 2 sections, roof mounted air conditioners, kitchenette, open plan with 2x partitioned offices, lighting, switchboard

Portable Office, Commander, approx. 35.4m x 6m, 3 sections, includes meeting room, ablutions room, locker room, crib room with kitchenette, wall mounted air conditioners, kitchenette, open plan with 2x partitioned offices, lighting, switchboard

Shipping Container, 40ft, (S/N: 56211945G1), 2.9m high, 4040kg tare weight, 26440kg max payload, timber floor, red oxide

Shipping Container, 20ft, (S/N: RSSU2873954), 2260kg tare weight, 28220kg max payload, timber floor, red oxide

Flammable Goods Storage Container, SCF Group, Type CH10A-101, (S/N: SCFU1015347), 1750kg tare weight, 3840kg max payload, 5590kg max gross weight, Approx 2430mm (W) x 2975mm (D) x 2860mm (H), with container pin top, bunded floor with forklift tine slots and bottom gate valve discharge

2 x Temporary Roof Structures, all steel bolted frame, steel roof sheeting, overall approx. 13m (w) x 5.1m (d) x 3.2m (h), approx. 4000kg, safety perimeter railing

Temporary Roof Structure, (S/N: Temporary Roof #6), all steel bolted frame, steel roof sheeting, overall approx. 13.8m (w) x 6m (d), 3.2m (h), approx. 4000kg, safety perimeter railing

Temporary Roof Structure, (S/N: Temporary Roof #8), all steel bolted frame, steel roof sheeting, overall approx. 14.7m (w) x 14.4m (d), 3.2m (h), approx. 4000kg, safety perimeter railing

Temporary Roof Structure, (S/N: Temporary Roof #7), all steel bolted frame, steel roof sheeting, overall approx. 14.6m (w) x 6m (d), 3.2m (h), approx. 4000kg, safety perimeter railing

Temporary Roof Structure, (S/N: Temporary Roof #5), all steel bolted frame, steel roof sheeting, overall approx. 14.4m (w) x 5.46m (d), 3.2m (h), approx. 4000kg, safety perimeter railing

Paint and Flash off Booths

Paint Flash Off Booth, Oliver, backdraft filter, sandwich panel construction, approx. 6m x 7,2m, 2.4m internal height, integrated lighting, twin sliding doors to one side, externally mounted extraction fan. 415V hardwired

Negative Pressure Spray Booth, Oliver, (S/N: 2210), Approx. 10.8m x 6.5m x 2.6m (h) internal, dust collection & exhaust system, Internal lighting, dual entry with double sliding doors, side access door, 6,700L/sec, 1,800L water tank capacity, natural gas heating

 

Mobile Plant & Trailers

Table Top Truck, Toyota, Dyna (BU61R-MDBTQ), VIN: JT731BU6107001684, 2977cc 11B Diesel engine, 5 speed manual, 3 seater, aluminium drop side tray (approx. 3.1m x2.0m) with Tieman 450kg electric tailgate lift, 4450kg GVM

Electric Utility Vehicle, Taylor Dunn, 1248B, (S/N: 69697), 36V, 3.5HP, 2 seater, fibreglass cabin with windscreen, rear tray approx. 1.9 x 1.1m, showing 2760 hours, on board 240V charger

Electric Utility Vehicle, Taylor Dunn, 1248B, (S/N: 69134), 36V, 3.5HP, 2 seater, fibreglass cabin with windscreen, rear tray approx. 1.9 x 1.1m, showing 00548.1 hours, on board 240V charger

Electric Utility Vehicle Trailer, Warehouse Equipment, TR4118, (S/N: 41198), deck approx. 2380mm (l) x 1225mm (w) x 570mm (h), steel frame, aluminium checker plate deck, 1000kg capacity

Ride On Reach Forklift, Crown, 45RRTT270, (S/N: 1A148842R), 6860mm maximum lift height, 1450kg maximum lift capacity, hour meter reads 3719.0, with Crown Type 3TBC 415V battery charger. Note: forklift is not operational

5 x Bi-Directional Yard Dog Trailers, EVZ Danum Engineering, Tow Vehicle (02-2TG2S), manufactured 7/2010, 2x steerable axles, hydraulic over-run brakes with park, pintle hook couplings, galvanised steel I-beam construction, deck approx. 11m x 2.8m, 10 Tonne SWL, 7.2 Tonne tare, LED tail lights, wheel chocks, KHitch 10 stud axles, 300-15 20ply pneumatic tyres

2 x Boat Slip Trailers, steel fabricated, approx. 6200 x 2160mm overall, fixed hull supports, 2x adjustable jockey wheels at front, with steel fabricated forklift attachment. (Location: End of dry dock)

Electric Trolling Motor, Watersnake, Venom ETW-LED44/36, 44 lbs thrust, 12 volt. (Location: Row 28 – 122- Kitting Building). unused.

LPG bowser, Gilbarco, with hose and nozzle

2 x Diesel Bowsers, Gilbarco, with hose

Cranes & Lifting Beams

Overhead Travelling Gantry Crane, Demag, (S/N: 21273-1985), Class C2 M4, MRC 10.0T, approx. 21m span, single girder, pendant control, Demag 10.0T wire rope hoist with powered travel, running rails & bus bar not included

Overhead Travelling Monorail Crane, Stahl, SWL 25T, pendant control, 25T wire rope hoist, running rail & bus bar not included

Magnetic Lifting Beam, Skanveir, 6x Skanveir electromagnet M220X440M-760W/110VDC,, 150kg/magnet poles or 200kg/magnet, 13.0m max length, 0.55m max width, 5mm max thickness, 1t max weight, approx. 11m overall length, with 2x fabricated stands

Overhead Travelling Gantry Crane, MRC, (S/N: CR0118), Class C5 M5, MRC 5T, approx. 11m, 5000kg electric wire rope hoist, pendant control, running rails not included

Overhead Travelling Gantry Crane, Morris, (S/N: CR107, 2781), Class C5 M5, MRC 10T, approx. 17m span, twin girder, operators booth, 10T electric wire rope hoist, running rails not included

Overhead Travelling Gantry Crane, Morris, (S/N: CR107S), Class C5 M5, MRC Main Hoist 24T, MRC Auxiliary Hoist 6T, approx. 17m span, twin girder, operators booth, 24T electric wire rope hoist, 6T electric wire rope hoist, running rails not included

Overhead Travelling Gantry Crane, Morris, (S/N: CR107N), Class C5 M5, MRC Main Hoist 24T, MRC Auxiliary Hoist 6T, approx. 17m span, twin girder, operators booth, 24T electric wire rope hoist, 6T electric wire rope hoist, running rails not included

Wall Mounted Jib Crane, approx. 3500mm jib, 500kg SWL, with Broomwade 500kg SWL pneumatic chain hoist, manual girder trolley

Engineering & Fabrication Machinery

2 x Extraction Fans, Fantech, 22B-B2-10, 11kW, 415V hardwired, metal skid base

Extraction Fan, 3.5kW, 415V hardwired, approx. 600mm diameter fan, approx. 200mm diameter inlet/outlet

Double Ended Pedestal Grinder, McPhersons, approx. 300mm diameter wheels

Metal Lathe, Yamazaki Mazak , 3.B.11, approx. 1150mm bed, approx. 230mm swing over bed, 3 jaw 250mm self centering chuck, 50mm bore feed, 39-1500 RPM, thread cutting, 415 volt

Powered Sheet Metal Guillotine, Kleen, (S/N: 3277), maximum cutting width approx. 1400mm wide, overhead lighting

Geared Head Drill, Corona Fred K Pollard, 15AX, (S/N: DB4058J42), 9HP, inbuilt coolant pump, height adjustable T-slot table approx. 320 x 400mm

Pedestal Drill Press, Hercus, DP25F, (S/N: 52), 32mm capacity, 16mm chuck, 125-4200 RPM, 240V plug in, 50Hz, adjustable height T-slot table approx. 300 x 350mm

Disc Sander & Linisher, Woodfast, 100mm wide belt, 250mm diameter disc, 240V

Double Ended Bench Grinder, Waldown, 200mm, pedestal base, 1HP, 415V plug in. (Location: 35 – Mech Maintenance)
Bandsaw, Jaespa, Model MSU5, (S/N: 735424), throat approx. 500mm, table approx. 620 x 620mm, 415V

Hydraulic Workshop Press, Enerpac, 100 Ton, Model IPE1006, (S/N: IPE10081073), adjustable bed height, approx. 880mm width, Enerpac electric hydraulic power pack, 240V

Electric Pedestrian Pallet Stacker, Crown, 15MT90A, (S/N: 25184), 700kg capacity, 2300mm maximum lift height, hour meter reads 896.2, inbuilt 240V

Bench Drill Press, Hafco Metal Master, SBD25A, 1HP, 16 speed, 240V

Flammable Goods Storage Cabinet, JustRite, Sure-Grip, 60L capacity, key lock, approx. 600mm (w) x 460mm (d) x 1000mm (h)

Metal Stationery Cabinet, 2 door, approx. 900 x 460 x 1800mm (h)

Heavy Duty Metal Cabinet, 2 door, approx. 920 x 460 x 1830mm (h), 3 point lock

Metal Stationery Cabinet, 2 door, approx. 900 x 460 x 1830mm (h)

Assorted lathe tooling & cabinet, includes various cutting and boring tools, drills and chucks, centres, magnetic bases and dial gauges, metal angled top cabinet with drawer and cupboard

Manual crop & shear, Peddinghous, 5RP10, hand lever operated, mounted on steel fabricated bench

Double ended pedestal grinder, Unknown make/model, approx. 300mm diameter wheels

Large Qty of Assorted Welding & Workshop Benches

Bays of Pallet Racking, Warehousing, Stock Shelving & Compactus Units

Automatic Pallet Wrapping Machine, EXP-108, (S/N: P1303J267), 240 volt

Compactus Unit, 2x single sided bays & 3x double sided bays, approx. 4.2m overall length, each bay approx. 1200mm (w) x 420mm (d) x 2200mm (h)

Compactus Unit, 2x single sided bays & 6x double sided bays, approx. 5.2m overall length, each bay approx. 4600mm (w) x 320mm (d) x 2350mm (h)

Security Filing Cabinet, Chubb, Class B, 4 drawer, combination lock

Qty 24x Bays Rolled Metal Shelving, each bay approx. 900mm (w) x 420mm (d) x 2150mm (h)

Compactus Unit, 2x single sided bays & 2x double sided bays, approx. 2.4m overall length, each bay approx. 920mm (w) x 300mm (d) x 2050mm (h)

Double Compactus Unit, each with 3x single sided bays & 4x double sided bays, approx. 4.15m overall length, each bay approx. 1900mm (w) x 320mm (d) x 2180mm (h)

Compactus Unit, File Hanging, 3x single sided bats & 1x double sided bays, approx. 3.0m overall length, each bay approx. 1250mm (w) x 450mm (d) x 2050mm (h)

Compactus Unit, 2x single sided bays & 4x double sided bays, approx. 5.35m overall length, each bay approx. 920mm (w) x 425mm (d) x 2000mm (h)

Qty 44x assorted mobile pedestal drawer units, various sizes & colours, no keys. (Location: 118 – Nelson Pier Workshop)
Compactus Unit, Brownbuilt, 2x single sided bays & 5x double sided bays, approx. 5.9m overall length, each bay approx. 2800mm (w) x 650mm (d) x 2400mm (h)

Compactus Unit, 2x single sided bays & 2x double sided bays, approx. 2.6m overall length, track approx. 3.2m long, each bay approx. 1250mm (w) x 2300mm (h)

Compactus Unit, Brownbuilt, 2x single sided bays & 2x double sided bays, approx. 3.2m overall length, each bay approx. 900mm (w) x 2450mm (h)

 

BUYERS PREMIUM

All Assets in this sale will be subject to a 13.75% (including GST) Buyers Premium which will be added to the sale price of each asset.

TERMS & CONDITIONS

For the full TIGER ASSET GROUP Returns Policy, Privacy Policy, Terms and Conditions, please refer to http://tigerassetgroup.com/sale-calendar/

Assets in this sale are sold “As Is, Where Is, With All Faults, If Any”

WORKPLACE HEALTH & SAFETY

Plant Hazard Reports will be available onsite with the assets being sold. The attached Plant Hazard Reports are provided for all powered equipment.

TIGER ASSET GROUP advises all buyers that all plant offered for sale may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice.

Please Note:

  • Persons under the age of 18 years will not be permitted onsite.
  • Visitors must wear a long sleeved shirt, long trousers and enclosed shoes at a minimum. Visitors will be required to wear hi visibility clothing at time of collection. 

It is a condition of entry to site that all visitors comply with any directions given by TIGER ASSET GROUP staff or their representatives. Work carried out on this site must be completed in a manner compliant with all Workplace Health & Safety legislation and any site specific requirements.

Removal of some items in this sale will require the satisfactory completion of a Safe Work Method Statement by the buyer / buyers representative prior to decommission and removal being undertaken.

A copy of a typical Safe Work Method Statement Template can be found HERE.

CUSTOMER PICK UP

DELIVERY IS NOT AN OPTION FOR THIS SALE.

THE COLLECTION AND REMOVAL OF ITEMS IS THE BUYERS RESPONSIBILITY 

To collect your purchases, please ensure bring a copy of your winners email or invoice as well photo ID. On the basis you send a third party to collect your goods on your behalf, you will need to send them with a copy of your winners email or invoice, a copy of your photo ID and a signed document authorising to release the goods.

COLLECTION TIME FRAME

By Appointment Only Between Monday 18th and Friday 22nd of June 2018

From 7:00am to 3:00pm (AEST)

Unless An Agreed Appointment is made prior to this with the Project Manager / Vendor

Any items not collected within this period will be deemed abandoned and resold or otherwise disposed of at the cost to the registered buyer. Storage Fees may also apply.

SITE SAFETY RULES

TIGER ASSET GROUP wishes to provide a safe environment for our employee’s, contractors and visitors. To assist in TIGER ASSET GROUP maintaining the highest levels of safety, visitors and contractors to this site are required to abide by any verbal instructions given by a representative of TIGER ASSET GROUP or the vendor and as a minimum, the following rules apply while onsite:

  1. Report to counter or reception on arrival and sign in. Sign out when leaving the site;
  2. Please observe no smoking on site (you can smoke out the front of the property on grass);
  3. No eating in the shed or outside of provided Kitchen / Amenity areas;
  4. Visitors are to be supervised at all times. Do not wander off unsupervised whist attending the site. Ensure no children are brought onto the site less than 16 years old;
  5. All attendees must wear provided ID stickers while onsite, failure to do so may result in being asked to leave the site;
  6. All attendees to this site must wear ‘closed’ shoes. Failure to adhere to this may result in you being asked to leave the site;
  7. If at any time you feel your activities may have compromised the safety of TIGER ASSET GROUP or its workers please advise management without delay;
  8. In the event of an emergency please follow the directions of assigned TIGER ASSET GROUP or vendor staff;
  9. Follow all safety directions, signs in the workplace and adhere to all site safety rules;
  10. Please ensure that you remain 3 metres away from mobile plant and take directions from TIGER ASSET GROUP representatives on where to load
  11. Under no circumstances should you operate plant and equipment on this site. All plant and equipment operation must be authorised by TIGER ASSET GROUP or management;
  12. Lease ensure all equipment brought onsite is safe for its intended use and design;
  13. Please ensure all electrical equipment brought on-site has been tested and tagged in accordance with AS3760;
  14. Please ensure that you are appropriately licensed and competent for the work that you have been commissioned. This includes sub-contractors you may use on-site;
  15. All contractors performing works MUST have completed a site induction prior to any work being undertaken;
  16. Please be aware that this site is under 24 hour monitoring by CCTV cameras;
  17. Under no circumstances are visitors to touch or handle any auction item lots during the inspection. For any assistance, see a TIGER ASSET GROUP Representative;
  18. No photographs are to be taken outside the Construction Hall. Failure to adhere to this may result in your camera being confiscated and you being required to leave the site;
  19. Please also be aware that bags and vehicles maybe subject to a Security search upon request; and
  20. Drugs and alcohol are not permitted on this site in any form. Anyone suspected of being under the influence of drugs or alcohol will be required to leave the site

selling equipment

Contact Lee Pulbrook for an obligation free, confidential consultation to discuss options that TIGER ASSET GROUP can offer for asset disposal and project management.

Lee Pulbrook

Mobile: 0499 993 285

Email: lee@tigerassetgroup.com

TIGER ASSET GROUP offers the following competitive sale strategies, each of which can be tailored to accommodate the specifics of your disposition needs.

• Live Auctions
• Webcast Auctions
• Online Auctions
• Sealed Bid Auctions
• Expressions of Interest Sales
• International Tender Sales
• Brokered Sales