Insolvency Online Auctions

2 x High Voltage Electrical Contractor Fleet Liquidation Sales

Under Instructions from Messrs. Mark Robinson, Philip Carter & Daniel Walley of PPB Advisory in the matter of P&U Pty Limited and Icon Plant Pty Limited Both (Administrators Appointed)

These Online Auctions are being held on Pickles Online Auctions website





8 December - 14 December 2016

Online Auctions Close

4:00PM (Local Times)


Lee Pulbrook

0499 993 285

Richard White

0420 973 216


20 Woorang Street, Milperra NSW 2214 &

Cnr Phoenix and Sudlow Rd, Bibra Lake WA 6163

View Map


Monday, 12 December 2016 8:00am – 4:30pm (Local Times)


All items must be collected by Friday, 16 December 2016.

Items are only available for collection between the times of 8:00am – 4:30pm (not including public holidays)

EWP Trucks

EWP Truck 03/2002 Isuzu FVR 950T Long, 4×2, Vin: JALFVR23RY3000143 15,8870kms GVM: 16000 Kg, Tare: 11955 Kg, Sitec 270 Turbo diesel motor with Eaton fuller transmission, Fitted with GMJ Equipment, model LLF16.350/S EWP, S/n: LLF16.380303, Built 03/2009, 350 Kg SWL, 17.5m Working height, 132/33 LV, Inspected: 23/5/2013, Next inspection due 23/5/2018

EWP Truck 07/2004 Isuzu F3 FVZ1400 Long FVZ5MF Vin: JALFVZ23V33000172 155,182kms 3 Seater, 6×4, GVM: 24000, GCM: 36000 Kg Sitec 275 Turbo diesel motor with Eaton fuller transmission, Bullbar, Fitted with 11/2004 GMJ, model: LL22350 EWP, S/n: LL22161104, 325 Kg SWL, 23.5m Platform height, Major inspection 24/9/2015, Next major inspection 24/9/2020, 66/33/LV Insulated with side toolboxes

EWP Truck 06/2003 Isuzu F3 FVZ1400 Long, Vin: JALFVZ23V33000050, 3 Seater, 6×4, GVM: 24000 Kg, GCM: 36000 Kg, Sitec 275 Turbo diesel motor with Eaton Fuller transmission, Bullbar, Fitted with 02/2004 GJM, model LL22350 EWP, S/n:LL22030204, 325 Kg SWL, 23.5m Working height, 66/33/LV insulated, Last major inspection 10/11/2014, Next major inspection due 10/11/2019, With side toolboxes

EWP Truck 07/2007 Isuzu F3 FTS750 4×4, VIN: JALFTS34H6700Q334 151,560kms 3 Seater, GVM: 15000 Kg, GCM: 20500 Kg, Sitec Turbo diesel motor with 6 Speed manual transmission, Fitted with HI-Ranger 2007, model TL50P EWP, S/n: 2071035048, 50 Ft platform height, Insulated 46 Kv AC, Last test 29/10/2007

EWP Truck 4/2005 Isuzu FTS 800 4×4, VIN: JALFTS34LB7000162 GVM 13900, Sitec 235 Manual transmission, PTO F/W: GMJ Equipment EWP Model: LLF16.350, S/n: LLF16.880405, 300 Kg SWL, 2012 Inspection, Due 9-2017 LV Insulated

EWP Truck 4/1999 Hino FM1J 6×4, Vin: JHDFM1JRLXXX10050 Auto transmission, PTO, Fitted with: Redmond Gary EWP, Model TF17MV/RB, S/n: 1125, DoM:1999, LV Insulated, Major inspection 10/2/2015, Due 10/2/2020 With side mount toolboxes

Crane Borers & Cable Pulling / Brake Trucks

Crane Borer Truck 9/1998 Isuzu FVZ1400 6×4, Vin: JALFVZ23MW3000023 GVM: 24000, Eaton fuller transmission, Proline, Evans Deakin 8T Crane borer with Robway scales

Crane Borer Truck 02/1995 Ford L8000 Series model 99531 Vin: 6FPAAAAHG3RG51599 351,427kms C/Cab 6×4, 2 Seater, GVM: 24000 Kg, GCM: 24000 Kg, Fitted with Pacific Hydraulic crane borer, 8 Tonne SWL winch Rope 16mm DIA 34X71WRCX40 Non Rotating, 2070 GBF, 164 Kn, Major inspection 11/8/10 Next Inspection due 11/8/20

Cable Pulling Truck 1992 Isuzu 500 4×4 FSS500, FSS5, Vin: MFJALFSS12FM3600021 173,154kms GVM: 11000 Kg, Tare: 5890 Kg
Fitted with Cable pulling unit PW0319, Tare weight excluding drum 2300 Kg, Hydraulic driven with operators control platforms

Brake Truck 06/2005 Isuzu F3 FTS 750 4×4, Vin: JALFTS34H47000173 38,873 3 Seater, White, 8.1 Ltr Sitec 220 Turbo diesel motor with 6 speed manual, GVM: 13000 Kg, Tare:8280 Kg, With integrated rear N&J Truck body builders brake cable unit with drum reels and operators enclosed station & Bartlett BT1200H 7000 Kg Ring feeder tow bar

Cable Brake Truck 11/1988 Isuzu “FTS Series 8EW02-FTS12HA 4×4, Vin: JALFTS12HH3590467, 315,610kms 3 Seater, GVM: 12500 Kg
Fitted with 20′ Rear tray and Skid Mounted Cable Brake unit, Hydraulic driven with safety barriers

Tipper & Service Trucks

 Tipper Truck 10/2008 Isuzu FSR 850 Long, Vin: JALFSR34787000481 Sitec 235, GVM 14000, GCM: 6060, Manual, PTO, Fitted with: Low side, Tipping tray & toolbox between tray and cab

Tipper Truck 10/2008 Isuzu FSR 850, Vin: JALFSR34787000487 Sitec 235, GVM 14000, GCM: 6060, Manual, PTO, Fitted with: Low side, Tipping tray & toolbox between tray and cab

Tipper Truck 08/2005 Hino FG1J Ser C/Cab 4×2, JHDFG1JJPXXX11657 334,601kms 3 Seater, GVM: 24000, Tare: 7168 Kg, 6 Speed manual transmission, Rear Steel tipping body, Approx 4800mm (L) x 2400mm (W), Tow bar

Tipper Truck 4/2005 Hino Dutro U414 Series Vin: JHFTA03H000001800

Service Truck 10/2001 Isuzu FSS 550 4×4, Vin: JALFSS33FY7000057 350,813 Sitec 200 6.5 Ltr Turbo diesel engine with 6 Speed manual transmission Fitted with Denkat truck bodies 2001 Service body with toolboxes, Ladder racks, Towbar

Service Truck 06/2005 Isuzu NPR250 4×2 Medium, Vin: JAANPR70L37105269 374,099 3 Seater, GCM: 7990 Kg, GVM: 4490, Tare: 3940
Sitec 140 Turbo diesel engine, Manual transmission, Fitted with Service rear body with side roller door tool cabinets, Ladder racks, Rear engineers vice tow bar

Service Truck 6/2005 Isuzu NPR 250 Medium, Vin: JAANPR70L37105280 Sitec 140 engine, Manual, Fitted with: Toolbox and ladder racks, Assorted tools etc

Tipper Truck 02/2004 Hino FC4J Series, Vin: JHDFC4JGPXXX10127 285,439 C/Cab, 4×2, 3 Seater, GCM: 15000 Kg, GVM: 10400 Kg, Turbo diesel with 6 speed manual transmission, Fitted with 4800 x 2400 Tipper body and towbar

Service Truck 2006 Isuzu NPS 300 4×4 (NPS5SF), Vin: JAANPS75L57100164 25,313 Sitec 150 Diesel motor with 5 Speed manual transmission, Tare: 4180 Kg, GVM: 6000 Kg, Fitted with Aus Trailer Spares A10014007 1000Kg winch 3636 Kg Hauling, 30m 2070 Grade S/n:6352, Hi-Rail Attachment, Rear service body with side toolboxes and ladder racks, Towbar

Service Truck 01/2007 Isuzu NQR 250 Medium, Vin: JAAN1R75L57100755 3 Seater, Sitec 175 Diesel engine, GVM: 8500, Tare:4170, GCM: 12200 Kg, Fitted with rear service body with multiple toolboxes, Top ladder racks, Rear pintle/50mm ball towbar

Service Truck 1/2001 Isuzu NPR300, Vin: JAANPR71LY7101511 GVM: 6,200, Manual, Fitted with tray body with toolboxes

Utes, Vans & Vehicles

Utility 12/2015 Holden Colorado LS Dual cab 4×4 Hard tonneau, Towbar, Auto

2 x Utility 12/2015 Holden Colorado LS RG 4WD Dual cab, 5 Seater, 2.8 Ltr CTDI Engine with 6 Speed Manual transmission with Soft toneau

2 x Utility 06/2012 Holden Colorado RG 4WD LX Dual cab, 2.8 Ltr CTDI Engine with Auto transmission, Fitted with Bullbar, Towbar, Soft Toneau cover

Utility 2012 Nissan Navara Dual Cab 4×4

Utility 03/2014 Ford Ranger XLS 3.2 Ltr 5 Cylinder diesel motor with 6 Speed manual transmission, ARB bullbar with winch, Towbar and hard toneau cover

Utility 04/2011 Ford Ranger XL Dual cab XL, 4×2, 5 Seater, White, TDCI Motor with auto transmission with rear canopy, Towbar

Utility 3/2009 Ford Ranger XL Dual Cab 4×4 Auto, Towbar

Utility 3/2007 Ford Ranger Single Cab 4×4 Manual, Bull bar, Alloy tray with boxes & Ladder rack,

Utility 02/2012 Mazda BT50 4×4 3 Seater, 6 Speed manual, Fitted with rear alloy tray wth 2x side tool boxes, Towbar

Utility 08/2008 Mazda BT50/B3000 4×4 Single cab, 3 Seater, GVM: 3058 Kg, 3.0 Ltr Turbo diesel motor with 5 Speed manual transmission, Silver with Alloy tray back, ARB Bullbar & Warn XD9000 Winch, Towbar

Utility 08/2007 Toyota Hilux Workmate 150 Series 3 Seater, 2.7 Ltr VVTi petrol engine with 5 Speed manual transmission, Fitted with Alloy tray, Ladder racks and 2x Checkerplate toolboxes, Towbar

Utility 07/2007 Toyota Hilux Workmate 150 Series TGN16R-TRMDKQ3 Single cab, 3 Seater, White, 2.7 Ltr VVTi engine with manual transmission, Fitted with rear alloy tray with 2x toolboxes and 2x Underside boxes, Towbar

Van 09/2013 Hyundai TQ-V iLoad 3 Seater, 2x Rear sliding doors, 2x Rear swing doors, 6 Speed manual transmission, Rear service van fittout with shelves & tool cabinets, Roof racks, Towbar and Rear step

Wagon 07/2012 Nissan X Trail ST Xtronic CVT, 5 Seater, 2 Ltr 4 Cylinder motor


Plant Trailer C.2005 6T9T27R0150MYR001 4.5 x 2.5 Float Bobcat Trailer, 4500kg ATM

Cable Trailer 02/1992 Redmond Gary 6H9T26000N2AW7003 Single axle 4.5T, 5 Tonne ATM, Max drum size 2400mm Diameter x 1500mm Wide

Pole Trailer 03/1990 6H9T21000L2AN8004 NSW U-57818 2500 Kg Max load, Tare: 1550 Kg, GTM: 405 Kg, Ring feeder hitch, Hydraulic front jack up stand, Single axle with brakes

Cable Trailer 4/1992 Telecom / Buderim 6H9T26TRTN2AA8012 ATM 9000 Kg, Dual axle

Cable Trailer 1980 Gross trailer mass 1.43T, Tare: 0.43T, Max load 1.00T

Box Trailer 2013 Dual axle 8×4, High sides

Dual Axle Box Trailer 01/2015 Trailer City 8×5 6J1C1TYT1FR083139 With jockey wheel

Cable Trailer 1970 small

Cable Trailer Telecom With diesel power pack

Drum Trailer c1970 Single Axle

Box Trailer Dual axle

Excavator & Forklift

Excavator C.2008 Kubota Super Series model KX161-3ST, SN: 70326 Pin: JKUK1613A01H70326, Engine: 801871, Rubber tracks, ROPS canopy model RFP6000 with loading ramps

Forklift 2005 Toyota 42-7FG25 SN: 407FG25-26969 1,429hrs 2.5T, Dual Fuel, 3 stage mast with side shift, weight gauge and slipper tynes

High Voltage Electrical Cable Stock

Large Qty of High Voltage Electrical cable in assorted lengths and specs


08/10 Hino 500 Flat Bed EWP Truck

ODO: 44,721km
Manual Transmission, 2×4 drive
C/W: Beacons, Isolator, Outriggers, Fire Extinguishers

EWP Details:

Make: ACM
DOM: 2011
Model: ACM-280
Boom Length: 28m


2006 Isuzu NPS300 Line Truck

VIN: JAANPS75L57100110
4×4, Manual Transmission, Beacons, Isolator,
ODO: 248,412km
C/W: Dual Mounted Tool Boxes, Mounted Vice, Contingency for tools and industrial consumables.

2006 Isuzu NPS300 Line Truck

VIN: JAANPS75L57100167
ODO: 149,053km
4×4, Manual Transmission, Beacons, Isolator, Towbar
C/W: Dual Mounted Tool Boxes, Mounted Vice, Contingency for tools and industrial consumables, Step Ladders, Winch Bullbar

1997 Isuzu FTS750 Tipper Truck + Hiab

VIN: JALFTS33HT3000189
ODO: 281,433km
Ferrari 710 Hiab Truck Mounted Crane, S/N: 048, Inspection Due: 4/5/17
GCM: 20,500kg, Pintle Hook Tow Hitch, Beacons, Isolator, Outriggers, Manual Transmission

1981 Isuzu TWD25 Winch Truck

VIN: 1270492
ODO: 76,115km
Manual Transmission, 6×4 Drive, Beacons, Isolator, Fire Extinguishers, Safety Railing, Overheard guarding, Rear mounted Winch Teeth
C/W: Approx 6x Steel rope winches – Hydraulic Powered.

1993 Ford L900 Crane Borer Truck

ODO: 698, 394km
6×4 Drive, Manual Transmission, Pintle Hook Tow Hitch, Beacons, Isolator, Fire Extinguishers, Out Riggers, Mounted Tool Box,
SWL: 4000kg/8000kg




2002 Toyota Landcrusier Utility

VIN: JTELB71J307022701
ODO: 446,251km
Single Cab Ute, 4×4, Side Steps, Bullbar, Spotlights, Drop Down Sides, Towbar

Cable Trailer

DOM: 1990
Custom Make dual Axle Self Loading Cable trailer

3x Fire Fighting Trailers

DOM: 2015
Dual Axle box trailers, Steel Grating Sides, C/W approx 1000L Water Tank, Tank mounted engine

Box Trailer

DOM: 2013
8×5 Dual Axel Box Trailer, Spare Tyre



All goods in this sale will be subject to a 8.25% processing fee (inclusive of GST).

For example: bid price $100 Inc GST + 8.25% processing fee = $108.25.


Customer Pickup:


To collect your purchases, please ensure bring a copy of your winners email or invoice as well photo ID. On the basis you send a third party to collect your goods on your behalf, you will need to send them with a copy of your winners email or invoice, a copy of your photo ID and a signed document authorising to release the goods.


Collection Timeframe:

Tuesday 15 to Friday 16 December 2016 8am to 4pm (Local Times)

Any items not collected within this period, will be deemed abandoned and resold or otherwise disposed of at the cost to the registered buyer.


For the full TIGER ASSET GROUP Returns Policy, Privacy Policy, Terms and Conditions, please refer to

By registering and bidding you have agreed to our terms and conditions of sale. Please familiarise yourself with these before bidding on items in this sale.


Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
Descriptions and photographs should be used as a guide only.
If you are unsure do not bid as no refunds will be given.
Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

Assets in this sale are sold “As is where is With all faults if any”

These assets are used therefore inspection is highly recommended prior to bidding, description photos should be used as a guide only.



Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports) will be available onsite with the assets being sold. The attached Plant Hazard Report is provided for all generic hand and power tools along with office IT equipment. Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts. TIGER ASSET GROUP advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice.


Note: Persons under the age of 18 years will not be permitted onsite.

Tradespeople eg; electricians, plumbers, refrigeration mechanics etc will be required to produce the relevant licence before commencing work on site. Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.

It is a condition of entry to site that all visitors comply with any directions given by TIGER ASSET GROUP staff or their representatives.

Work carried out on this site must be completed in a manner compliant with all Workplace Health & Safety legislation.

All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.

TIGER ASSET GROUP will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)

The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.

Enclosed footwear must be worn onsite – Safety boots will be required at industrial sites.

Entry to third party sites will be subject to the site controllers specific site requirements.

Removal of some Items in this sale will require the satisfactory completion of a Safe Work Method Statement by the buyer / buyers representative prior to decommission and removal being undertaken. A copy of TIGER ASSET GROUP’s  Safe Work Method Statement Template can be found HERE.

selling equipment

Contact Ben Roden for an obligation free, confidential consultation to discuss options that TIGER ASSET GROUP can offer for asset disposal and project management.


Ben Roden

Mobile: 0412 229 350



TIGER ASSET GROUP offers the following competitive sale strategies, each of which can be tailored to accommodate the specifics of your disposition needs.

• Live Auctions
• Webcast Auctions
• Online Auctions
• Sealed Bid Auctions
• Expressions of Interest Sales
• International Tender Sales
• Brokered Sales