International Tender

Exhaust Manufacturing Facility Closure Sale

Under Instructions from Walker Australia Pty Limited

Tender Document

TENDER DATES

Starts

Mon
10
Jul

Ends

Wed
4
Oct

10 July - 4 October 2017


Tender Closes

4:00PM (ACST)

Enquiries

Lee Pulbrook

+61 (0)499 993 285
lee@tigerassetgroup.com

Matt Travess

+61 (0)499 072 388
matt@tigerassetgroup.com


Location

29 Morrow Rd

O’Sullivan Beach, SA 5166

View Map

Inspection

By Appointment with Project Managers


Collection

By Appointment with Project Managers

LOT 1 – Fuji Muffler Line

CNC Pick and Place Machine, Fuji, Model: GA11861, Year: 2008, Pneumatic unloading station, twin stack, approx. 2000mm x 1050mm capacity, with optical gaurding Snhineider Electric Magellis Compact PC Touch Screen Control. (Section No: 4) (Location: Toyota Front Fuji Line) (Machine No.: 36000)
CNC Shell Rolling Machine, Fuji, Model: GA11861, Year: 2008, approx 600mm sheet capacity, PLC controller. (Section No: 4) (Location: Toyota Front Fuji Line) (Machine No.: 36001)
CNC Shell Shrink Press, Fuji, Model: GA11861, Year: 2008, Serial No: 842LRS, With Mahi decline roller conveyor, PLC control with Fanuc Powermate control, Schnieder Electric Magellis Compact PC touch screen controller, Hydraulic Powerpack (approx 15-20HP motor) and tank approx 1350x1200x440mm.. (Section No: 4) (Location: Toyota Front Fuji Line) (Machine No.: 36002)
CNC Shell Welding Machine, Fuji, Model: GA11861, Year: 2008, Serial No: 842W1, Nippon Plasma 350AH-III Inverter Welder, Orion Nc3000 Air Chiller mounted in steel frame with Digital controler, with loading and off loading station, pnuematic controlled height roller conveyor. (Section No: 4) (Location: Toyota Front Fuji Line) (Machine No.: 36003)
CNC Shell Welding Machine, Fuji, Model: GA11861, Year: 2008, Serial No: 842W2, Nippon Plasma 350AH-III Inverter Welder, Orion Nc3000 Air Chiller mounted in steel frame with Digital controler, with loading and off loading station, pnuematic controlled height roller conveyor. (Section No: 4) (Location: Toyota Front Fuji Line) (Machine No.: 36004)
CNC Rotary Shell Cutting Machine, Fuji, Model: GA11861, Year: 2008, Serial No: 842C1, Hydraulically powered rotary cutter, with pnuematic rotating roller conveyor, bottom mount powered rubber waste conveyor (approx 230mm long), gravity outfeed roller (approx 2500mm long). (Section No: 4) (Location: Toyota Front Fuji Line) (Machine No.: 36005)
CNC Rotary Shell Cutting Machine, Fuji, Model: GA11861, Year: 2008, Serial No: 842C2, Hydraulically powered rotary cutter, with pnuematic rotating roller conveyor, bottom mount powered rubber waste conveyor (approx 230mm long), gravity outfeed roller (approx 2500mm long). (Section No: 4) (Location: Toyota Front Fuji Line) (Machine No.: 36006)
Vertical Electric Screw Press, Eagle, Model: GMS-VB, Serial No: 880101, 415 volts, 50hz, 12HP, 9kw, optical gaurding, approx 1300mm stroke. (Section No: 4) (Location: Toyota Front Fuji Line) (Machine No.: 14031)
Spot Welder, Mechelon, Model: 046-92-02, Serial No: 08903-2002, With Miyachi Weltouch Model CY-210B digital weld controller, foot pedal control, water cooled. (Section No: 4) (Location: Toyota Front Fuji Line) (Machine No.: 1072)

LOT 11 – Toyota Front Exhaust Line

CNC Two Station 6-Axis Robotic Welding Cell, Motoman, Model: NX100/HP6, Year: 2005, Serial No: S4Q851-1-2, Type ERCR-ES1400M-AE00, Schneider Electric Magelis Compact PC touch screen controller, Motoman NKS-001E pendant controller, Miller Auto Axcess 300DI MIG Welder, Motoman YR-HP6-A00, 6kg payload. (Section No: 4) (Location: Toyota Front) (Machine No.: 35063)
CNC Twin Torch Rotary Welding Station, Melton, Serial No: MMCC#10405, 2x Miller Axcess 300 MIG Welders with 2x Miller Auto ROE Controls, Optical guarding system, internal swing jib, 250kg, automatic roller shutter.. (Section No: 4) (Location: Toyota Front) (Machine No.: 35067)
CNC 6-Axis Robotic Welding Station, Melton, Serial No: MMCC#10406, 2x Miller Axcess 300 MIG Welders, Miller Laser Guided single welding head, Motoman TR-MAO1400 manipulator, 3kg payload, automatic roller shutter. (Section No: 4) (Location: Toyota Front) (Machine No.: 35065)
Pneumatic Leak Tester, Melton, Serial No: 10407, With Hitachi VXR inkjet printing unit, optical guarding, 240 volt, . (Section No: 4) (Location: Toyota Front) (Machine No.: 61101)
5x Assorted Gravity Feed Exhaust Frames, steel fabricated. (Section No: 4) (Location: Toyota Front)

LOT 21 – Muffler Line 5C

Vertical Hydraulic Press (Ram Machine), Marand, Serial No: 1554628, Optical guarding, 415 volt, With hydraulic power pack (approx. 5kw, tank approx. 800x500x580mm), . (Section No: 2) (Location: Muffler line 5C) (Machine No.: 13011)
Multispot Welder Station, RoMan, 8x pneumatic heads, optical guarding, WellTouch Model CY-150A digital weld counter, Dorman 17TS20, water cooled. (Section No: 2) (Location: Muffler line 5C) (Machine No.: 1043)
Projection Spot Welder, Denka, Year: 2003, Serial No: 0302095/218, 415 volt, water cooled, Myachi WelTouch CY-210B digital counter. (Section No: 2) (Location: Muffler line 5C) (Machine No.: 1077)
Roving Machine Station, Rove, electro-pneumatic operation, optical guarding, . (Section No: 2) (Location: Muffler line 5C) (Machine No.: 23004)
Beading Station, Eagle, Model: DVCS, Serial No: 5378, electric, mechanical guarding. (Section No: 2) (Location: Muffler line 5C) (Machine No.: 8016)
Leak Test Station, Sage Automation, Approx. 500mm capacity, with Zebra 105SL label printer. (Section No: 2) (Location: Muffler Line 5C) (Machine No.: 61054)
Shell Rolling Station, Marand, Capacity approx. 700mm (w), ProFace touch screen control, Myachi Weltouch CY-210B digital weld control. (Section No: 2) (Location: Muffler line 5C) (Machine No.: 25006)
Horizontal Flaring Station, Alfon, Approx. 1000mm capacity, optical guarding, With Allen Bradley Panel View 600 control, Dynacool A200 Classic air dryer, Hydraspec hydraulic power pack (tank approx 900x1000x400mm). (Section No: 2) (Location: Muffler line 5C) (Machine No.: 27005)
CNC Two Station Twin Robot Welding Cell, Melton, Serial No: MMCC#12441, Comprising Yasakawa 2013 rotary bed, twin Melton rotating station frames, 2x Yasakawa Motoman MA1900 Type YR-MAN01900-A00 manipulators, 3kg payload, 2x Miller Auto Axcess 450DI welding power supplies, with control cabinets, safety fencing and optical guarding, Zebra 105SL label printer, Schneider Electric Magelis touch screen control, 415 volt. (Section No: 2) (Location: MY14 Robot) (Machine No.: 35069)
Manual Welding Rework Station, Melton, Serial No: MMCC#8373-1, Miller Invision 456 MIG welder, CIG Transmig 400i MIG welder, Zebra 10SL label printer, Allen Bradley PanelView 1000 digital control panel. (Section No: 2) (Location: MY14 Robot) (Machine No.: 35050)

Lot 40 – Bending Cell 7

Automatic Up Cut Saw, IGW, (Section No: 2) (Location: Bend Cell 7) (Machine No.: 17069)
Hydraulic End Forming Machine, McKee Addison, Model: FM-70 RS+Digi, Serial No: J037187, (Section No: 2) (Location: Bend Cell 7) (Machine No.: 7085)
Vertical Machining Centre, Pinnacle, Model: VMC650, Year: 2005, Serial No: 6P00354H0, (Section No: 2) (Location: Bend Cell 7) (Machine No.: 67014)
Hot Water Parts Washer, M Davis, stainless steel cabinet, digital temperature control, electric water pump. (Section No: 2) (Location: Bend Cell 7) (Machine No.: 58015)
CNC Hydraulic Mandrel Pipe Bender, Addison, Model: PB75, Serial No: VE PROJECT, safety cage, optical guarding. (Section No: 2) (Location: Bend Cell 7) (Machine No.: 2035)
Single Rotator Welding Station (Stage 1 ), Melton, Model: 9 Axis Weld Rotary Tool Torch, Serial No: MMCC#8366, 2x Miller Invision 456P DC Inverter arc welders, with 2x Miller 60M Series 24 volt wire feeders, 2x fixed welding heads, Allen Bradley PanelView 1000 touch screen control, Optical guarding, 415 volt. (Section No: 2) (Location: Bend Cell 7) (Machine No.: 35040)
Two Station Single Robot Welding Station, Melton, Serial No: MMCC#8367, Miller Invision welder, Motoman Y6 manipulator, Allen Bradley PanelView 1000 touch screen control. (Section No: 2) (Location: Bend Cell 7) (Machine No.: 35041)

Lot 60 – Bending Cell 17

CNC Hydraulic Mandrel Pipe Bender, Addison, Model: DB 76ST, Year: 1996, Serial No: MC9576, Max OD 76mm, max wall thickness 3mm, with Addison controller. (Section No: 2) (Location: Bend Cell 17) (Machine No.: 2025)
Automatic Up Cut Saw, Adige, Model: SC350, Serial No: 161530, (Section No: 2) (Location: Bend Cell 17) (Machine No.: 17043)
Automatic Up Cut Saw, Adige, Model: SC425, Serial No: 96114518, (Section No: 2) (Location: Bend Cell 17) (Machine No.: 17056)
Hydraulic End Forming Machine, McKee Addison, Model: FM-70RF+Digi, Serial No: J036623, with Allen Bradley PanelView 600 control, . (Section No: 2) (Location: Bend Cell 17) (Machine No.: 7084)
Hydraulic End Forming Machine, (Section No: 2) (Location: Bend Cell 17) (Machine No.: 7029)
Two Station Single Robot Welding Station, Melton, Serial No: MMCC#8370-1, Miller Auto Invision II welder, Motoman YRUP6-A00 manipulator, 6kg payload, Allen Bradley PanelView 1000 touch screen control, optical guarding, automatic welding curtains. (Section No: 2) (Location: Bend Cell 17) (Machine No.: 35044)

Lot 70 – Bending Cell 10

CNC Hydraulic Mandrel Pipe Bender, Addison, Model: DB 76, Serial No: MC9861, Max OD 76mm, max wall thickness 3mm, with Siemens Sinumerik control, pendant control. (Section No: 1) (Location: Cell 10 Toyota Fuel Filler) (Machine No.: 2027)
Hydraulic End Forming Machine, Bema, Model: BS, Year: 2003, Serial No: 2709, Type 12×6, mobile operators control. (Section No: 1) (Location: Cell 10 Toyota Fuel Filler) (Machine No.: 7097)
Verical Linisher, Scantool, Model: 150VX-2000, Serial No: 23958, 150x2000mm belt, 30/34m/sec, . (Location: Cell 10 Toyota Fuel Filler) (Machine No.: 18050)
Automatic Up Cut Saw, IGW, Optical gaurding, Pro-Face Digital control, . (Section No: 1) (Location: Cell 10 Toyota Fuel Filler) (Machine No.: 17068)
Hydraulic End Forming Machine, Eagle, Model: Type 10, (Section No: 1) (Location: Cell 10 Toyota Fuel Filler)
Double Sided Hydraulic Press, Optical guarding. (Section No: 1) (Location: Cell 10 Toyota Fuel Filler) (Machine No.: 14012)
Hot Water Parts Washer, M Davis, Serial No: C3603, stainless steel cabinet, digital temperature control, electric water pump. (Section No: 1) (Location: Cell 10 Toyota Fuel Filler) (Machine No.: 58016)
Hydraulic End Forming Machine, McKee Addison, Model: FM-70 RF+Digi, Serial No: J037188, (Section No: 1) (Location: Cell 10 Toyota Fuel Filler) (Machine No.: 7086)
Rotational Welding Positioner Station, Choidi Enterprise, fixed welding head, 2-axis positioner, Miller welding power supply, Miller 60M autofeeder, automatic door. (Section No: 1) (Location: Cell 10 Toyota Fuel Filler) (Machine No.: 51026)
Leak Testing Station, With Schnieder Magellis control, optical gaurding, pnuematic operation. (Section No: 1) (Location: Cell 10 Toyota Fuel Filler) (Machine No.: 51026A)
2x Cooling Racks, Gravity feed, steel fabricated. (Section No: 1) (Location: Cell 10 Toyota Fuel Filler)

Lot 90 – Bending Cell 16

CNC Hydraulic Mandrel Pipe Bender, Addison, Model: DB 76ST, Year: 1996, Serial No: MC9575, Max OD 76mm, max wall thickness 3mm, Addison control, optical gaurding. (Section No: 1) (Location: Bend Cell 16) (Machine No.: 2024)
Automatic Up Cut Saw, IGW, Optical gaurding, Pro-Face Digital control, . (Section No: 1) (Location: Bend Cell 16) (Machine No.: 17065)
Vertical Linisher, Scantool, Model: 150VX-2000, Serial No: 23398, 150x2000mm belt, 30/34m/sec, . (Section No: 1) (Location: Bend Cell 16) (Machine No.: 18046)
Hydraulic End Forming Machine, McKee Addison, Model: FM-70 Digiform III, Serial No: J023874, (Section No: 1) (Location: Bend Cell 16) (Machine No.: 7075)

Lot 100 – Bending Cell 21

CNC Hydraulic Mandrel Pipe Bender, Addison, Model: DB75ESRB, Year: 2002, Serial No: MC10260, Max OD 76mm, max wall thickness 3mm, Addison 75 Databend controller, Addison control with Siemens Simatic PC FI45 control, . (Section No: 1) (Location: Bend Cell 21) (Machine No.: 2032)
Automatic Up Cut Saw, Adige, Model: SC425, Year: 1997, Serial No: 97045403, ProFace Digital control, optical guarding. (Section No: 1) (Location: Bend Cell 21) (Machine No.: 17058)
Automatic Up Cut Saw, IGW, (Section No: 1) (Location: Bend Cell 21) (Machine No.: 17064)
Hydraulic End Forming Machine, Addison, Model: Expander, Year: 1994, (Section No: 1) (Location: Bend Cell 21) (Machine No.: 7039)
Hydraulic End Forming Machine, Addison McKee, Model: FM-70 (2) ID/OD DigiForm, Serial No: J046332, Allen Bradley PanelView 600 control. (Section No: 1) (Location: Bend Cell 21) (Machine No.: 7071)
Rotary Pipe Linisher, M Davis, Year: 2002, (Section No: 1) (Location: Bend Cell 21) (Machine No.: 18042)
Hydraulic End Forming Machine, McKee Addison, Model: FM-70 RS + Digi, Serial No: J024272, Allen Bradley PanelView 600 control. (Section No: 1) (Location: Bend Cell 21) (Machine No.: 7077)
Vertical Linisher, Scantool, Model: 150VX-2000, 150x2000mm belt, 30/34m/sec, . (Section No: 1) (Location: Bend Cell 21) (Machine No.: 18048)

Lot 110 – Bending Cell 5

CNC Hydraulic Mandrel Pipe Bender, Addison, Model: DB 75E, Serial No: MC10122, Max OD 76mm, max thickness 3mm, Addison 75 Databend controller, Siemens Sinumeric control, pendant control. (Section No: 1) (Location: Bend Cell 5) (Machine No.: 2028)
Hydraulic Ram End Forming Machine, Addison McKee, Model: FM-70 RF+RF-VS XT, Serial No: J075398, Optical guarding. (Section No: 1) (Location: Bend Cell 5) (Machine No.: 7091)
Automatic Up Cut Saw, IGW, ProFace Digital control, optical guarding. (Section No: 1) (Location: Bend Cell 5) (Machine No.: 17061)
Hydraulic Ram End Forming Machine, Addison McKee, Model: FM-70 RF+RF-VS XT, Serial No: J067997, Optical guarding. (Section No: 1) (Location: Bend Cell 5) (Machine No.: 7089)

Lot 120 – Bending Cell 23

CNC Hydraulic Mandrel Pipe Bender, Addison McKee, Model: DB 75ESR, Year: 2003, Serial No: 10276, Not in service – portions of control board removed, max OD 76mm, max thickness 3mm, Addison 75 Databend Controller, Siemens Sinumerik control, . (Section No: 1) (Location: Bend Cell 23) (Machine No.: 2033)
Hydraulic End Forming Machine, Eagle, Model: EE, Year: 1996, Serial No: 15397, (Section No: 1) (Location: Bend Cell 23) (Machine No.: 7064)
Automatic Up Cut Saw, IGW, ProFace Digital control, optical guarding. (Section No: 1) (Location: Bend Cell 23) (Machine No.: 17063)
Hot Water Parts Washer, Davis Engineering, Serial No: 3, stainless steel cabinet, digital temperature control, electric water pump. (Section No: 1) (Location: Bend Cell 23) (Machine No.: 58014)

Lot 130 – Bending Cell 3

CNC Hydraulic Mandrel Pipe Bender, Addison McKee, Model: DB 76, Serial No: 9100, Addison Databend controller, Siemens Simatic FI45 control, Mechanical guarding. (Section No: 1) (Location: Bend Cell 3) (Machine No.: 2014)
Automatic Up Cut Saw, Adige, Model: SC425, Year: 1996, Serial No: 96115417, (Section No: 1) (Location: Bend Cell 3) (Machine No.: 17055)
Hydraulic End Forming Machine, McKee, Model: FM-70 ID/OD+(2) Digi, Serial No: J024034, (Section No: 1) (Location: Bend Cell 3) (Machine No.: 7079)
Hydraulic End Forming Machine, Eagle, Model: C7ER, Serial No: 3052, 415 volt, 10HP. (Section No: 1) (Location: Bend Cell 3) (Machine No.: 7034)

Lot 140 – Bending Cell 15

CNC Hydraulic Mandrel Pipe Bender, Addison, Model: DB 76ST2, Year: 1998, Serial No: MC9752, Addison Databend controller, Addison control, Mechanical guarding. (Section No: 1) (Location: Bend Cell 15) (Machine No.: 2026)
CNC Vertical Machining Center, Pinnacle, Model: SV65, Year: 2008, Serial No: 6P20081D6, Mitsubishi control, powered swarf conveyor, 20 station tool changer, bed size approx 850x500mm. (Section No: 1) (Location: Bend Cell 15) (Machine No.: 67015)
Hydraulic End Forming Machine, McKee, Model: FM-70 ER+ER+ID/OD, Serial No: 73963, Triple head. (Section No: 1) (Location: Bend Cell 15) (Machine No.: 7069)
Automatic Up Cut Saw, Adige, Model: SS425, Year: 1996, Serial No: 96055117, (Section No: 1) (Location: Bend Cell 15) (Machine No.: 17057)
Hot Water Parts Washer, M Davis, stainless steel cabinet, digital temperature control, electric water pump. (Section No: 1) (Location: Bend Cell 15) (Machine No.: 58013)

Lot 150 – Bending Cell 19

Addison Bender Electric, Addison McKee, Model: DB89 ESRB, Year: 2002, Serial No: MC10169, Max OD 89mm, 2.5mm max thickness, Addison 75 Databend controller, Siemans Sinumerik control, optical guarding. (Section No: 1) (Location: Bend Cell 19) (Machine No.: 2030)
CNC Vertical Machining Center, Pinnacle, Model: VMC650S, Year: 2005, Serial No: 6P00354H0, 415 volt, Mitsubishi control, bed size approx 900x600mm, 20 station tool changer, . (Section No: 1) (Location: Bend Cell 19) (Machine No.: 67013)
Hydraulic End Forming Machine, Precision, Model: 1/0, Serial No: 1310, Single head. (Section No: 1) (Location: Bend Cell 19) (Machine No.: 7013)
Hydraulic End Forming Machine, Precision, Model: CE., Serial No: 1456, Two head. (Section No: 1) (Location: Bend Cell 19) (Machine No.: 7010)
Vertical Hydraulic Press, Hare, Model: 63HP, Year: 1994, Serial No: 94H9136, Pneumatic mechanical guarding. (Section No: 1) (Location: Bend Cell 19) (Machine No.: 24005)
Hot Water Parts Washer, M Davis, stainless steel cabinet, digital temperature control, electric water pump. (Section No: 1) (Location: Bend Cell 19) (Machine No.: 58012)
Automatic Up Cut Saw, IGW, ProFace Digital control, optical guarding. (Section No: 1) (Location: Bend Cell 19) (Machine No.: 17062)
Twin Torch Vertical Rotary Welding Station, Melton, Serial No: MMCC#10403, 2x Miller Axcess 300 welding power supplies, with 2x Miller ROI wire feeders, 2x fixed welding heads, Schnieder Electric Magelis Compact PC touch screen control, Optical guarding, automatic welding curtain, 415 volt, gravity feed cooling rack. (Section No: 1) (Location: Behind Bend Cell 19) (Machine No.: 35068)

Lot 160 – Bending Cell 14

CNC Hydraulic Mandrel Pipe Bender, Addison, Model: DB 70ST4, Year: 1996, Serial No: MC9535, Max OD 70mm, 4mm max wall thickness, Addison Databend controller, Siemens Sinumerik control, pendant control. (Section No: 1) (Location: Bend Cell 14) (Machine No.: 2023)
Automatic Up Cut Saw, Adige, Model: SC350, Serial No: 161523, (Section No: 1) (Location: Bend Cell 14) (Machine No.: 17046)
Hydraulic End Forming Machine, Precision, Model: CE., Serial No: 1453, Two head. (Section No: 1) (Location: Bend Cell 14) (Machine No.: 7011)
Hydraulic End Forming Machine, Addison McKee, Model: FM-70 Dual ID/OD DigiForm, Serial No: J068297, Two head, Allen Bradley PanelView Plus 1000 control. (Section No: 1) (Location: Bend Cell 14) (Machine No.: 7090)
Pneumatic Plug Inserter Press, M Davis, (Section No: 1) (Location: Bend Cell 14) (Machine No.: 14030)
Hydraulic End Forming Machine, Eagle, Serial No: 15398L, Two head, 415 volt. (Section No: 1) (Location: Bend Cell 14) (Machine No.: 7063)
Hydraulic End Forming Machine, Eagle, Model: CE2000, Serial No: 3477, Two head, 415 volt, 10 HP. (Section No: 1) (Location: Bend Cell 14) (Machine No.: 7066)
Spot Welder, CIG, Model: Spot Matic TAE 1724, Serial No: BF0193, 30 kVA, 415 volt, water cooled. (Section No: 1) (Location: Bend Cell 14) (Machine No.: 1053)
Twin Torch Vertical Rotary Welding Station, Melton, Model: Twin Torch Rotary Vertical Welder, Serial No: MMCC#10404, 2x Miller Axcess 300 welding power supplies, with 2x Miller ROI wire feeders, 2x fixed welding heads, Schneider Electric Magelis Compact PC touch screen control, Optical guarding, automatic welding curtain, 415 volt, gravity feed cooling rack. (Section No: 1) (Location: Behind Bend Cell 14) (Machine No.: 35066)

Lot 170 – Bending Cell 20

CNC Hydraulic Mandrel Pipe Bender, Addison McKee, Model: DB 75ESR, Year: 2002, Serial No: MC10237, Max OD 75mm, max 2mm wall thickness, Addison 75 Databend controller, Siemens Sinmatic FI45 control, pendant control. (Section No: 1) (Location: Bend Cell 20) (Machine No.: 2031)
Automatic Up Cut Saw, Adige, Model: SC425, Year: 1996, Serial No: 96115416, (Section No: 1) (Location: Bend Cell 20) (Machine No.: 17053)
Hydraulic End Forming Machine, Eagle, Model: CE, Serial No: 2409, Two head, 415 volt, 10 HP. (Section No: 1) (Location: Bend Cell 20) (Machine No.: 7043)
Vertical Hydraulic Press, Hare, Model: 63HP, Serial No: 91H9105, Pneumatic mechanical guarding. (Section No: 1) (Location: Bend Cell 20) (Machine No.: 24001)
Hydraulic End Forming Machine, McKee Addison, Model: FM-70 Digiform, Serial No: J020459, Two head, Allen Bradley PanelView 600 control. (Section No: 1) (Location: Bend Cell 20) (Machine No.: 7072)
Hydraulic End Forming Machine, Eagle, Model: D2000, Serial No: 3475, Two head, 415 volt 10 HP. (Section No: 1) (Location: Bend Cell 20) (Machine No.: 7065)
Notcher Machine, Pneumatic operation. (Section No: 1) (Location: Bend Cell 20) (Machine No.: 47007)
Electric Pipe Drilling Machine, CSK, Pneumatic mechanical guarding. (Section No: 1) (Location: Bend Cell 20) (Machine No.: 59028)

Lot 200 – Fuel Filler Bending Line

CNC Hydraulic Mandrel Pipe Bender, Opton, Model: MSO-50t-1D, Opton controller, mechanical and optical guarding. (Section No: 3) (Location: GMH Fuel Filler) (Machine No.: 2039)
Hydraulic End Forming Machine, BLM, Model: AST-80, Year: 2001, Serial No: 407010408089, 415 volt, hydraulic power pack. (Section No: 3) (Location: GMH Fuel Filler) (Machine No.: 7099)
Hydraulic Tube drawing Machine, CTC, 415 volt, hydraulic power pack. (Section No: 3) (Location: GMH Fuel Filler) (Machine No.: 7100)
Hydraulic End Forming Machine, Bema, Model: PAN-10.6, 415 volt. (Section No: 3) (Location: GMH Fuel Filler) (Machine No.: 7101)
Automatic Up Cut Saw, Adige, Model: SC425, Year: 1996, Serial No: 96115415, 415 volt, mechanical guarding. (Section No: 3) (Location: GMH Fuel Filler) (Machine No.: 17054)
Hydraulic Press, 415 volt, optical & mechanical guarding, hydraulic power pack. (Section No: 3) (Location: GMH Fuel Filler) (Machine No.: 4018)
Spot Welder, Rayline, 415 volt, water cooled, optical & mechanical guarding. (Section No: 3) (Location: GMH Fuel Filler) (Machine No.: 1086)
Hydraulic Shuttle Ram, Eagle, Model: Shuttle E, Serial No: 553988, 415 volt, 15 HP, mechanical guarding, Allen Bradley PanlView 300 control. (Section No: 3) (Location: GMH Fuel Filler) (Machine No.: 7082)

Lot 210 – Muffler Line 5A

Two Station Single Robot Welder, Marand, Serial No: C3633, Panasonic YA-1NAR61500 manipulator (2002), 6kg payload, Panasonic Pana Star RF350 welding power supply, 2x ProFace control screens, automatic welding curtains. (Section No: 4) (Location: Muffler Line 5A) (Machine No.: 35035)
Powered Belt conveyor, inclined, belt approx 500x2800mm, approx 1600mm high. (Section No: 4) (Location: Muffler Line 5A)
Shell Roll Former, Polytech, (Section No: 4) (Location: Muffler line 5A) (Machine No.: 25003)
Spot Welder, Toaseiki, Model: SLP 75B5 10-25, Serial No: 86800, 415 volt, 204 kVA max welding power, pneumatic clamping. (Section No: 4) (Location: Muffler line 5A) (Machine No.: 1010)
Hydraulic Flanger, Eagle, Model: Flo Flanger 400, 400 volt, 32 HP, optical guarding, Allen Bradley PanelView 600 control. (Section No: 4) (Location: Muffler Line 5A) (Machine No.: 27008)
Horizontal Hydraulic Flange Press, Pneumatic clamping, ProFace digital control, optical guarding. (Section No: 4) (Location: Muffler line 5A) (Machine No.: 13002)
Multispot Welder Station, Walker, 8x pneumatic heads, optical guarding, WellTouch Model CY-150A digital weld counter, Dorman 17TS20, water cooled. (Section No: 4) (Location: Muffler line 5A) (Machine No.: 1063)
Multispot Welder Station, Walker, 8x pneumatic heads, optical guarding, WellTouch Model CY-150A digital weld counter, Dorman 17TS20, water cooled. (Section No: 4) (Location: Muffler line 5A) (Machine No.: 1064)
Roving Machine Station, Rove, Electro-pneumatic operation, optical guarding, . (Section No: 4) (Location: Muffler Line 5A) (Machine No.: 23002)
Electric Beading Machine, Eagle, Model: GMS-VS-4100, Serial No: 880179, ProFace digital control, mechanical guarding, 3.75HP, 28 kW. (Section No: 4) (Location: Muffler Line 5A) (Machine No.: 8021)
Leak Test Station, Digital control, Zebra 105SL label printer, pneumatic operation. (Section No: 4) (Location: Muffler line 5A) (Machine No.: 61032)
Hydraulic End Forming Machine, Eagle, Two head, 415 volt. (Section No: 4) (Location: Muffler Line 5A)

Lot 230 – Muffler Line 7

Shell Rolling Station, Polytech, Manual infeed, mechanical guarding. (Section No: 4) (Location: Muffler line 7) (Machine No.: 25001)
Sizing and Tack Spot Weld Station, EMF, Model: KJ602, Serial No: CA0010, Miyachi CY-150A weld controller, optical guarding, Weldpak 15 power supply. (Section No: 4) (Location: Muffler line 7) (Machine No.: 1041)
Vertical Hydraulic Flattening Press Station, 415 volt, optical guarding. (Section No: 4) (Location: Muffler line 7) (Machine No.: 14003)
Vertical Hydraulic Flaring Station, 415 volt, optical guarding. (Section No: 4) (Location: Muffler line 7) (Machine No.: 4011)
Horizontal Hydraulic Flaring Press Station, 415 volt, optical guarding. (Section No: 4) (Location: Muffler line 7) (Machine No.: 27001)
Spot Welder, Relion, Serial No: 1237, 415 volt, pneumatic clamping. (Section No: 4) (Location: Muffler line 7) (Machine No.: 1065)
Roving Machine Station, Owen Cor, Model: V202, Serial No: AO94245, Electro-pneumatic operation, optical guarding, . (Section No: 4) (Location: Muffler line 7) (Machine No.: 23005)
Vertical Beading Station, Eagle, Model: 82-247, Serial No: DBS3-82, 415 volt, 15 HP, mechanical guarding. (Section No: 4) (Location: Muffler line 7) (Machine No.: 8010)
Leak Test Station, ProFace digital control, pneumatic operation. (Section No: 4) (Location: Muffler line 7) (Machine No.: 61101)
Spot Welder, Dorman, Model: 17-TS-17/001, Serial No: 135, 415 volt, Miyachi WelTouch CY-210A weld controller. (Section No: 4) (Location: Muffler line 7) (Machine No.: 1032)
Spot Welder, Kimura, Model: SK-C, Year: 1983, Serial No: 64744, 415 volt, 200 kVA max input, . (Section No: 4) (Location: Muffler line 7) (Machine No.: 1062)
Vertical Hydraulic Flaring Press Station, 415 volt, optical guarding. (Section No: 4) (Location: Muffler line 7) (Machine No.: 4035)
Vertical Hydraulic Flaring Press Station, 415 volt, optical guarding. (Section No: 4) (Location: Muffler line 7) (Machine No.: 4004)
Horizontal Lock Seamer Station, approx 800mm capacity, 415 volt, optical guarding. (Section No: 4) (Location: Muffler line 7) (Machine No.: 3008)
Horizontal Lock Seamer Station, Eagle Moon, Model: MOD4S, Serial No: G3482J, approx 1100mm capacity, 48kW, 415 volt, mechanical guarding with key lock, with electrical control cabinet. (Section No: 4) (Location: Muffler line 7) (Machine No.: 3012)
Horizontal Hydraulic Flaring Press Station, approx 800mm capacity, optical guarding, 415 volt. (Section No: 4) (Location: Muffler line 7) (Machine No.: 450E)
Horizontal Hydraulic Press Station, MS Davis, approx 1300mm stroke, optical guarding, 415 volt. (Section No: 4) (Location: Muffler line 7) (Machine No.: 13010)
Multispot Welder Station, Schofiel, 8x pneumatic heads, optical guarding, WellTouch Model CY-210B digital weld counter, water cooled, 415 volt. (Section No: 4) (Location: Muffler line 7) (Machine No.: 1076)
Horizontal Hydraulic Press Station, Walker, approx 1300mm stroke, optical guarding, 415 volt. (Section No: 4) (Location: Muffler line 7) (Machine No.: 13006)

Lot 260 – Muffler Line 2

Single Station 6-Axis Robot Welder, Marand, Panasonic YA-1KAR61Y42 6-axis manipulator (2002), 6kg payload, 2x control screens, pendant control, automatic welding shutters. (Section No: 4) (Location: Muffler line 2) (Machine No.: 35030)
Vertical Hydraulic Assembly Press, Adelaide Engineering, Model: 440, Serial No: 79-553, Approx 800mm stroke, optical guarding, 415 volt. (Section No: 4) (Location: Muffler line 2) (Machine No.: 4013)
Vertical Hydraulic Assembly Press, Adelaide Engineering, Model: 440, Serial No: 78-558, Approx 800mm stroke, optical guarding, 415 volt. (Section No: 4) (Location: Muffler line 2) (Machine No.: 4015)
Powered Belt conveyor, Belt approx 350mm wide, inclined, approx 5000mm, 415 volt. (Section No: 4) (Location: Muffler line 2)
Horizontal Hydraulic Assembly Press, Arramat, Approx 800mm stroke, optical guarding, 415 volt. (Section No: 4) (Location: Muffler Line 2) (Machine No.: 13009)
Hydraulic Flo Flanger, Eagle, Model: Flow 400, Serial No: 880139, 415 volt, 27.5kW, Allen Bradley PanelView 600 control, . (Section No: 4) (Location: Muffler line 2) (Machine No.: 27006)
Muffler Lockseamer Station, Arramat, ProFace digital control, pneumatic pick & place loading, . (Section No: 4) (Location: Muffler line 2) (Machine No.: 3011)
Automatic Multispot Welder Station, 12x pneumatic heads, optical guarding, ProFace digital control, WellTouch Model CY-150A digital weld counter, Dorman power supply, water cooled. (Section No: 4) (Location: Muffler line 2) (Machine No.: 1070)
Vertical Hydraulic Press, Alfon, Optical guarding, ProFace digital control. (Section No: 4) (Location: Muffler line 2) (Machine No.: 14039)
Multispot Welder Station, Schofiel, Serial No: BARRA, 12x pneumatic heads, WellTouch Model CY-210B digital weld counter, Weldpak 15 power supply, water cooled. (Section No: 4) (Location: Muffler line 2) (Machine No.: 1073)
Outerwrap Station & Unloader, Arramat, approx 800mm capacity, ProFace & Allen Bradley PanelView 300 Micro digital controls, optical guarding, powered rubber belt conveyor with rotator outfeed system, with vertical pneumatic press. (Section No: 4) (Location: Muffler line 2) (Machine No.: 5005)
Roving Machine Station, Electro-pneumatic operation, optical guarding, . (Section No: 4) (Location: Muffler Line 2) (Machine No.: 23003)
Electric Beading Machine, Eagle, Model: GMS-VS-410, Serial No: 880102, ProFace & Allen Bradley PanelView 600 digital controls, mechanical guarding. (Section No: 4) (Location: Muffler line 2) (Machine No.: 8020)
Robotic Pick & Place , Kawasaki, Model: ZX165-U, Year: 2003, Serial No: ZX1651811, 6-axis, 165kg payload, pneumatic clamping attachment, with controller. (Section No: 4) (Location: Muffler line 2) (Machine No.: 35036)
Part Conveyor, (Section No: 4) (Location: Muffler line 2)
Leak Test Station, M Davis, Pneumatic operation, Zebra 110PAX4 label printer. (Section No: 4) (Location: Muffler line 2) (Machine No.: 61053)
Hydraulic End Forming Machine, Eagle, Model: D, Serial No: 1373, two head, 10HP, 415 volt. (Section No: 4) (Location: Muffler line 2)
Powered Rubber Belt Conveyor, belat approx 300mm wide, approx 2500mm long. (Section No: 4) (Location: Muffler line 2)
Pneumatic Vertical Flange Press, Approx 400mm stroke. (Section No: 4) (Location: Muffler line 2)

Lot 280 – Bending Cell 18

CNC Hydraulic Mandrel Pipe Bender, Addison, Model: DB75 ESR, Year: 2001, Serial No: MC10170, Max OD 76mm, 3mm max wall thickness, Addison 75 Databend controller, Siemens Simatic PC FI45 control, pendant control, optical guarding. (Section No: 5) (Location: Bend Cell 18) (Machine No.: 2029)
Automatic Up Cut Saw, Adige, Model: SC425, Serial No: 97045404, 415 volt, mechanical guarding. (Section No: 5) (Location: Bend Cell 18) (Machine No.: 17059)
Hydraulic End Forming Machine, McKee Addison, Model: FM-70 Digiform III, Serial No: J023873UAL, Two head, Allen Bradley PanelView 600 control. (Section No: 5) (Location: Bend Cell 18) (Machine No.: 7074)
Vertical Hydraulic Assembly Press, Approx 600mm stroke, optical guarding. (Section No: 5) (Location: Bend Cell 18) (Machine No.: 14002)
Vertical Linisher, Scantool, Model: 150VX-2000, Serial No: 23399, 415 volt, 150x2000mm belt. (Section No: 5) (Location: Bend Cell 18) (Machine No.: 18049)
Spin Wash Parts Washer, Furlan, 415 volt, approx 1050mm dia basket. (Section No: 5) (Location: Bend Cell 18 behind) (Machine No.: 58007)

Lot 290 – Bending Cell 22

CNC Hydraulic Mandrel Pipe Bender, Addison, Model: DB89 ESRB, Year: 2003, Serial No: MC010227, Max OD 89mm, 2.5mm max wall thickness, Addison Databend controller, Siemens Simatic PC FI45 control, pendant control, optical guarding. (Section No: 5) (Location: Bend Cell 22) (Machine No.: 2034)
Automatic Up Cut Saw, IGW, ProFace Digital control, optical guarding. (Section No: 5) (Location: Bend Cell 22) (Machine No.: 17066)
Hydraulic End Forming Machine, McKee Addison, Model: FM-70 RF+Digi, Serial No: J024270, Two head, Allen Bradley PanelView 600 control. (Section No: 5) (Location: Bend Cell 22) (Machine No.: 7081)
Hydraulic End Forming Machine, McKee Addison, Model: FM-70 Dual Digi, Serial No: J025244, Two head, Allen Bradley PanelView 600 control. (Section No: 5) (Location: Bend Cell 22) (Machine No.: 7078)
Vertical Hydraulic Press, Hare, Optical guarding, 415 volt. (Section No: 5) (Location: Bend Cell 22) (Machine No.: 24009)
Single Station Robot Welder, Marand, Panasonic YA-1KAR61 (2002), 6kg payload, 2x Panasonic positioning units (model YA-1GJB11), Powersafe welding power supply, ProFace digital control, pendant control, automatic welding curtains, key safety lockout. (Section No: 5) (Location: Bend Cell 22) (Machine No.: 35032)

Lot 300 – Resonator Cell

C-Frame Hydraulic Press, Eagle, Model: 40T C-Frame, Serial No: 554091, Allen Bradley PanelView 300 control, optical guarding with cage enclosure, 400 volt, 40HP. (Section No: 7) (Location: Resonator Cell) (Machine No.: 14037)
Hydraulic End Forming Machine, Eagle, Model: I/O I/O (T), Serial No: 554092, Two head, 16.6kW, 20HP. (Section No: 7) (Location: Resonator Cell) (Machine No.: 14038)
Hydraulic End Forming Machine, Eagle, Model: CE-2000, Serial No: 3478, Two head, 415 volt, 10HP. (Section No: 7) (Location: Resonator Cell) (Machine No.: 7062)
Notcher, IJW, Single station, 415 volt, . (Section No: 7) (Location: Resonator Cell) (Machine No.: 47009)
Automatic Up Cut Saw, Adige, Model: SC350, Serial No: 161533, mechanical guarding. (Section No: 7) (Location: Resonator Cell) (Machine No.: 17045)
Linisher, Scantool, Model: 150VX-2000, Serial No: 23216, 150x2000mm belt, 30/34m/sec, . (Section No: 7) (Location: Resonator Cell) (Machine No.: 18047)

Lot 310 – Bending Cell 4

CNC Hydraulic Mandrel Pipe Bender, Addison McKee, Model: DB 75ESRB, Year: 2003, Serial No: MC10279, Max OD 76mm, 3mm max wall thickness, Addison 75 Databend controller, Siemens Simatic PC FI45 control, pendant control, optical guarding, cage enclosure, . (Section No: 6) (Location: Bend Cell 4) (Machine No.: 2036)
Automatic Pipe Drill Machine, Walker, Mechanical guarding, pneumatic shutter, 415 volt, coolant bath & pump, bed approx 1200x500mm. (Section No: 6) (Location: Bend Cell 4) (Machine No.: 59027)
Hydraulic End Forming Machine, Addison McKee, Model: FM-70 (2) ID/OD Digiform, Serial No: J047796, two head, Allen Bradley PanelView 600 control. (Section No: 6) (Location: Bend Cell 4) (Machine No.: 7087)
Automatic Up Cut Saw, Adige, Model: SC425, Serial No: 97045401, mechanical guarding, 415 volt. (Section No: 6) (Location: Bend Cell 4) (Machine No.: 17060)
Vertical Linisher, Scantool, Model: 150VX-2000, Serial No: 24102, 150x2000mm belt, 30/34m/sec, . (Section No: 6) (Location: Bend Cell 4) (Machine No.: 18053)

Lot 320 – Muffler Line 5B

Shell Roller, Walker, approx 600mm capacity, infeed chute approx 1700mm long, Weldpak 15 power supply, Miyachi Weltouch CY-150A weld controller, mechanical guarding. (Section No: 7) (Location: Muffler Line 5B) (Machine No.: 25004)
6 Spot Multispot Welder, K You-Go, touch screen control, fence enclosure, optical guarding, water cooled, 2x Nadex PHS-1092G-DC-E weld control (2012). (Section No: 7) (Location: Muffler Line 5B) (Machine No.: 1084)
Flatten and Flare Machine, Walker, fence enclosure, optical guarding, hydraulic part clamping. (Section No: 7) (Location: Muffler Line 5B) (Machine No.: 27003)
Powered rubber belt conveyor, inclined, belt approx 540x 2200mm, approx 1200mm high. (Section No: 7) (Location: Muffler Line 5B)
Horizontal Hydraulic Press Station, Serial No: 2390/84, approx max capacity 1600mm, 1000mm approx stroke, cage enclosure, optical guarding, pneumatic part clamping. (Section No: 7) (Location: Muffler Line 5B) (Machine No.: 13001)
Two Stage Single Robot Weldling Station, Schneider electric Magelis PC control, pendant control, auto welding curtains, Panasonic YA-1KAR61Y42 Manipulator, 6kg payload, (2002), Panasonic VR-006CEIII controller. (Section No: 7) (Location: Muffler Line 5B) (Machine No.: 35024)
Multispot Welder SDI, System Design & Integration Australia, 8xhead, Miyachi Wel cy-210A weld controller, optical guarding, mechanical sheild. (Section No: 7) (Location: Muffler Line 5B) (Machine No.: 1075)
Vertical Beading Station, Eagle, Model: DVCS-82, Serial No: 88-538, mechanical guarding, . (Section No: 7) (Location: Muffler Line 5B) (Machine No.: 8013)
Leak Test Station, ProFace digital control, pneumatic operation, Zebra 105SL label printer. (Section No: 7) (Location: Muffler Line 5B) (Machine No.: 61036)

Lot 330 – Rear Flow Rotary Welding Line

Single Axis Rotary Welder, Melton, Serial No: 10412, optical guarding, miller invision 456P DC inverter power supply, miller 60m series wire feeder, Schneider electric magelis compact pc control, auto weld curtain. (Section No: 7) (Location: Toyota Rear) (Machine No.: 35064)
Single Axis Rotary Welder, Melton, Serial No: MMCC#8535, optical guarding, miller invision 456P DC inverter power supply, miller 60m series wire feeder, allen bradley panelview 1000 control, auto weld curtain, 415 volt. (Section No: 7) (Location: Toyota Rear) (Machine No.: 35059)
Single Axis Rotary Welder, Melton, Serial No: MMCC#8536, Silver Streak pneumatic overhead unloading gantry, decline powered belt conveyor outfeed, optical guarding, miller invision 456P DC inverter power supply, miller 60m series wire feeder, allen bradley panelview 1000 control, auto weld curtain, 415 volt. (Section No: 7) (Location: Toyota Rear) (Machine No.: 35060)
Inkjet Printer, Model: Hitachi, Serial No: PXR, mechanical guarding, automatic operation. (Section No: 7) (Location: Toyota rear) (Machine No.: 65008)

Lot 340 – Rear Flow Rotary Welding Line

Single Torch 5-Axis Rotary Welding Station, Melton, Serial No: MMCC#8424, Silver Streak pneumatic ovehead unloading gantry, powered belt conveyor outfeed with rotator, optical guarding, miller invision 456P DC inverter power supply, miller 60m series wire feeder, allen bradley panelview 1000 control, auto weld curtain, 415 volt. (Section No: 6) (Location: VE Rears) (Machine No.: 35053)
Single Torch 5-Axis Rotary Welding Station, Melton, Serial No: MMCC#8423, optical guarding, miller invision 456P DC inverter power supply, miller 60m series wire feeder, allen bradley panelview 1000 control, auto weld curtain. (Section No: 6) (Location: VE Rears) (Machine No.: 35052)
Single Torch 5-Axis Rotary Welding Station, Melton, Serial No: MMCC#8426, Silver Streak pneumatic ovehead unloading gantry, powered belt conveyor outfeed, optical guarding, miller invision 456P DC inverter power supply, miller 60m series wire feeder, allen bradley panelview 1000 control, auto weld curtain, 415 volt. (Section No: 6) (Location: VE Rears) (Machine No.: 35055)
Single Torch 5-Axis Rotary Welding Station, Melton, Model: Single Torch 5 Axis, Serial No: MMCC#8427, Silver Streak pneumatic overhead unloading gantry, powered belt conveyor outfeed with rotator, optical guarding, miller invision 456P DC inverter power supply, miller 60m series wire feeder, allen bradley panelview 1000 control, auto weld curtain, 415 volt. (Section No: 6) (Location: VE Rears) (Machine No.: 35056)
Two Stage Single Robot Welder, Marand, 2x ProFace touch screen controls, 3x Panasonic YA-1GJB11 rotational positioner units, Panasonic YA-1KAR615Y42 manipulator, 6kg payload, (2002), 6kg payload, Panasonic YA-1GPAAy controller, automatic welding screens, . (Section No: 6) (Location: VE Rear) (Machine No.: 35033)

Lot 350 – Two Stage Robot Welder

Two Stage Single Robot Welder, 2x ProFace touch screen controls, pendant control, 4x Panasonic YA-1GJB11 rotational positioner units, Panasonic YA-1KAR615Y42 manipulator, 6kg payload, (2002), 6kg payload, Panasonic YA-1GPAAy controller, automatic welding screens, . (Section No: 3) (Location: Ford Diesel Cell) (Machine No.: 35031)

BUYERS PREMIUM

All Assets in this sale will be subject to a 12.5% (excluding GST) Buyers Premium which will be added to the sale price of each asset.

TERMS & CONDITIONS

TIGER ASSETS GROUP’s standard Tender Terms & Conditions may be viewed by CLICKING HERE.

The final Terms & Conditions will be listed in the Tender Document. The highest or any Tender may not necessarily be accepted.

Assets in listed in this sale are sold “as is, where is, with all faults, if any”

WORKPLACE HEALTH & SAFETY

Plant Hazard Reports will be available with the assets being sold.

TIGER ASSET GROUP advises all buyers that all plant offered for sale may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice.

Please Note:

  • Persons under the age of 18 years will not be permitted onsite.
  • Visitors must wear safety eyewear, high visibility vest, long sleeved shirt, long trousers and enclosed shoes at a minimum.

It is a condition of entry to site that all visitors comply with any directions given by TIGER ASSET GROUP staff or their representatives. Work carried out on this site must be completed in a manner compliant with all Workplace Health & Safety legislation and any site specific requirements.

Removal of some items in this sale will require the satisfactory completion of a Safe Work Method Statement by the buyer / buyers representative prior to decommission and removal being undertaken.

A copy of a typical Safe Work Method Statement Template can be found HERE.

CUSTOMER PICK UP

DELIVERY IS NOT AN OPTION FOR THIS SALE.

THE COLLECTION AND REMOVAL OF ITEMS IS THE BUYERS RESPONSIBILITY 

To collect your purchases, please make contact with the Project Manager to arrange a time.

COLLECTION TIME FRAME

Assets to be collected by appointment only.

Normal hours of operation are Monday to Friday, 8:00am – 4:30pm (AEST)

selling equipment

Contact Ben Roden for an obligation free, confidential consultation to discuss options that TIGER ASSET GROUP can offer for asset disposal and project management.

Ben Roden

Mobile: 0412 229 350

Email: ben.roden@tigerassetgroup.com

TIGER ASSET GROUP offers the following competitive sale strategies, each of which can be tailored to accommodate the specifics of your disposition needs.

• Live Auctions
• Webcast Auctions
• Online Auctions
• Sealed Bid Auctions
• Expressions of Interest Sales
• International Tender Sales
• Brokered Sales