Major Event Insolvency Online Auction Sale 1

Powdercoating Lines, Engineering & Manufacturing Business Closure

Under Instructions from Barry Kogan and Shaun Fraser (the “Administrators”) in their capacities as joint and several voluntary administrators of William Enterprise Group Pty Limited, William Enterprise Holdings Pty Limited, William Enterprise Trading Pty Limited, William Powdercoating & Fabrication Pty Limited and Eversure Fencing Pty Limited (all Administrators Appointed) & Various Other Vendors

Download Brochure

This Online Auction is being held on Pickles Auctions Website

Starts

Thu
26
May

Ends

Tue
31
May

26 May - 31 May 2016


Online Auction Closes

4:00PM (AEST)

Enquiries

Lee Pulbrook

0499 993 285
lee@tigerassetgroup.com

Matt Travess

0499 072 388
matt@tigerassetgroup.com


Location

11 Ferndell Street, South Granville, NSW 2124

View Map

Inspection

Monday May 30th from 8:30am to 4:00pm (AEST)


Collection

Wednesday 1st June 2016 8am to 4pm (AEST)

Thursday 2nd June 2016 8am to 4pm (AEST)

Friday 3rd June 2016 8am to 4pm (AEST)

Monday 6th June 2016 8am to 4pm (AEST)

Tuesday 7th June 2016 8am to 4pm (AEST)

Vertical Powder Coating Line

Vertical Powder Coating Line c.2015 Custom Fabricated, Joihey Powder Coat Module with Siemens Simatic panel touch screen controls Comprising: chain drive stock hanging system on fabricated frame and legs Pre cleaning spray chamber approx 36m long with 2x chemical holding tanks, Pallet spill bund, Water filtration system, 6 Cartridge type on stainless steel skid frame, 3x 4000 Ltr water tanks, 3x Galvanised chemical recovery tanks to end of cleaning chamber; 2 way dryer / oven, colourbond insulated panel contruction approx 8m x 11m with 3x Riello RS34 heater blowers natural gas. 1x Automated powder coat spray station, TW Gema with 30 x spray guns on auto vertical gantry, 1x Powder coat dust recovery system approx 1800 x 1800 x 6000mm (H) with cyclone hopper approx 1500mm Dia x 6000mm (H); With chain driven angled unloading arm with 1.5 Kw 3 phase motor, 415V hardwired

3 Table unloading station, each chain driven by 1.5 Kw 3 phase electric motor, table approx 5200x3500mm
3 Table unloading station, each chain driven by 1.5 Kw 3 phase electric motor, table approx 5200x3500mm
3 Table unloading station, each chain driven by 1.5 Kw 3 phase electric motor, table approx 5200x3500mm

Horizontal Powder Coating Line

Pass Through Powder Coating Booth, Joihey booth approx 2250 x 4000mm down draught comprising 2x 2011 TW Gema 5 gun powder coating type reciprocators model ZA06-28, 2 x single powder coating guns with Opti flex 2 boxes and 2 x control cabinets TW Gema. Joihey powder centre with Siemens Simatich Panel Touch Controller , booth with internal lighting TN Gema type optiflex A2 AS04 Powder coating booth control console, 2011, S/n:18101-00972 with operators platforms. 415V Hardwired
Bag Hopper, 1800 x 1800 x 5500mm with approx 1500mm Dia cyclone tower on skid frame. 415V Hardwired
Curing Oven Heater Cabinet, Insulated Sandwhich panel construction on skid frame. Cabinet approx 2900 x 1400mm fitted with Riello RS44 Natural Gas burner and fan powered by 3 phase 7.5kw induction motor, 415V Hardwired
Curing Oven Heater Cabinet, Insulated Sandwhich panel construction on skid frame. Cabinet approx 2900 x 1400mm fitted with Riello RS44 Natural Gas burner and fan powered by 3 phase 7.5kw induction motor, 415V Hardwired
Oven Heater Cabinet, Insulated Sandwhich panel construction on skid frame. Cabinet approx 2350 x 1400mm fitted with Riello 388 Natural Gas burner and fan powered by 3 phase 7.5kw induction motor, 415V Hardwired
Curing Oven / Baking tunnell, insulated sandwhich panel construction, approx 42m (L) with quantity of 240v cooling fans
Custom Fabricated Loading/Unloading station with checker plate fabricated platform, 2 tier, approx 4800 x 20,000, with 2 x operators platforms. 3 x stair cases
Chain Conveyor System, consiting of 2x drive motors with reduction drives, chain tensioner, approximately 200 metres of drive chain, quantity of assorted supporting columns
Wash Line comprising Pre Treatment Wash section / Cleaning chamber approx 55m long overall length, with preclean and rinse chamber including RS 34 Stainless steel chemical dosing system including multiparametric controller, 5x Red steel chemical tanks with top mounted 5.5 kw electric motors with pumps, 4 x assorted size S/S chemical holding tanks, 2 x Riello Natural Gas burners and 4x 240v Electric blower fans with chemical catch tray to end of line
Drying Oven / Baking tunnell, insulated sandwhich panel construction, approx 20m (L) with RB-3-40-21 electric 580mm blower fan on pedestal base, 415V Hardwired
Large Qty of assorted Powder Coat Line Wire product hangers in assorted sizes and shapes.

Roll Forming Lines

Roll Former – Fencing Sheet Profile, 12/2012, Model YC-760-940, SN: 8084, 5.3Kw, 3000Kg, 1000mm (W) capacity, set up with standard corrugated die as well as Z-profile dies, with powered coil unwinder, coil unwinding table, hydraulic cropping shear, 2x Hydraulic Power Packs each with 3kw & 4kw 3 phase induction motors, 1x 3 phase electric drive motor, digital operators panel, twin deck roller outfeed table, 415 volt hardwired

Roll Former – Rail Profile, 12/2012, Model YC-64-170, SN: 8085, 3kw, 3000Kg, 250mm (W) capacity, unpowered coil unwinder, unwinder table, hydraulic cropping shear, 1x 3kw Hydraulic Power Pack, 1x 3 phase electric drive motor, digital operators panel, roller outfeed table, 415 volt hardwired

Roll Former – Post Profile, 12/2012, Model YC-51-170, SN: 8086, 3kw, 300Kg, 250mm (W) capacity, unpowered coil unwinder, unwinder table, hydraulic cropping shear, 1x 3kw Hydraulic Power Pack, 1x 3 phase electric drive motor, digital operators panel, roller outfeed table, 415 volt hardwired

Roll Former – Fencing Sheet Profile, approx 1000mm (w) capacity, hydraulic cropping shear, digital operator panel

Roll Former – Post Profile, approx 250mm (w) capacity, hydraulic cropping shear, digital operator panel, 415 volt

Roll Former – Rail Profile, approx 250mm (w) capacity, hydraulic cropping shear, digital operator panel, 415 volt

Roll Former – Beading, approx 1000mm (w) capacity, hydraulic beading die, digital operator panel, 415 volt

Overhead Travelling Gantry Cranes

Overhead Traveling Gantry Crane, Konecranes No:1 Konecranes No:1, SWL 6.3 Tonnes, CK1138, With 2x 3.1T electric wire rope hoists. Approx 26m wide

Overhead Traveling Gantry Crane, Konecranes No:2 Konecranes No:2, SWL 6.3 Tonnes, With 1x 3.1T hoists. Approx 26m wide

Overhead Traveling Gantry Crane, Demag Class 2 21625 SWL 2000 Kg, Crane no.2. With approx 2000Kg wire rope electric hoist, Approx 20m wide on steel fabricated running rails Approx 22m long

 

Stretch Wrappers & Plant Services

 Tunnel Stretch Wrapping line 07/2015 Kingon, Model A0041, SN: 2150701, 380v, 7Kw, With powered infeed roller conveyor, Approx 7500mm (L) x 800mm (D) and Powered outfeed roller conveyor approx 9000mm(L) x 800mm (D) 700mm (w) throat, along with 3 Head Rotary Ring Stretch Wrapper Station Kingon, Single manual controls, with digital control panel and Siemens Smart Line touch screen which controls both stations, 415V Hardwired

Rotary Shrink Wrapper 08/2015 Kingdon, Model DS020E, SN: 1150626, 1.2 Kw, 240v, Xinje digital control

Packaged Air Compressor, 2014, Broadbent Industrial 22 8/DFF, S/N: 340906, 8 bar, 415v, 22Kw, Hardwired

Packaged Air Compressor, 2014, Broadbent Industrial 22 8/DFF, S/N: 340832, 8 bar, 415v, 22Kw, Hardwired

Packaged Air Compressor 2013, Broadbent Industrial 15 8/DF, S/N: 331186, 8 bar, 415v, 15Kw Hardwired

Packaged Air Compressor 2011, Broadbent Industrial 15 8/DF, S/N: 311299, 8 bar, 415v, 15Kw Hardwired

Industrial Air Compressor, Fracks, 4 Cylinder, belt driven by 7.5 Kw electric motor on H/D Castors, Fracks DFE18 air dryer, 415v hardwired

Vertical Air Receiving Tank, Broadbent, 2015, 1000 Psi max pressure, S/n: 15-K-3-9980, approx 700mm diameter x 2700mm high

Vertical Air Receiving Tank, Broadbent, 2015, 1000 Psi max pressure, S/n: 15-K-3-9979, approx 700mm diameter x 2700mm high

Vertical Air Receiving Tank, Broadbent, 2016, 1000 Psi max pressure, S/n: 16-K-40689, approx 700mm diameter x 2700mm high

Vertical Air Receiving Tank, Broadbent, 2016, 1000 Psi max pressure, S/n: 16-K-40690, approx 700mm diameter x 2700mm high

Vertical Air Receiving Tank, Broadbent, 2012, 1000 Psi max pressure, S/n: 12-K-37120, approx 700mm diameter x 2700mm high

Vertical Air Receiving Tank, Broadbent, 2016, 1000 Psi max pressure, S/n: 16-K-40680, approx 450mm diameter x 2400mm high

Forklifts & Lifting Equipment

 Forklift, 2007 Hyster model H4.00, SN: DX A232R03422E, 3920 Kg capacity, 4565mm Lift height, 3 Stage container mast, Dual fuel solid tyres

Forklift, 2004 Crown model CG30E-3, SN: CW-04522R, 2685 Kg Capacity, 3800mm Lift height, Dual fuel, Solid tyres

Ride on Reach Forklift, Hyster model N45ER SN: C138D03054L, Battery electric 36v, 6200mm Lift height, 1130 Kg capacity with charger

I Beam Lifting Jig, Pro Krane model P/L, 5 Tonne WLL, SN: 6691

Coil Lifting Jig, Pro Krane 6 Tonne WLL, SN: 6752

Engineering & Manufacturing Equipment

Forming Machine, 2x Hydraulic Rams with fabricated I Beam frame, Approx 4000mm (W) capacity with hydraulic power pack & 7.5 Kw motor

Horizontal Metal Cutting Bandsaw BFJY Model G4250, 800mm Throat with in and outfeed roller conveyors

 Metal Worker 2001 Hare & Forbes Model HF-80S, SN: 31611Z 80 Ton, 415v plug-in

Horizontal Metal Cutting Bandsaw Hafco Metal Master model ER-260A, 400mm Throat with clamping 240v, With In & Outfeed roller table frame

Section & Tube Rolling Machine, Hafco model RR-24, Round 19-76mm Square 16-50mm 240v

Anvil H/D on Fabricated Stand

Cold Cut Saw, Thomas 350 Super Technics 15, SN: 00317, with Infeed roller conveyor, 415v Plug-in

Pedestal Drill Press Ixion 2 Speed

Bench Drill Hang Hu Z4125 1005378 25mm, 10 Speed

Compound Mitre Saw Ryobi MS254RG 240v, 2000w

Oxy Set On trolley

Table Saw, 2015 Ryobi model RTS1825RG, SN: 004116 240v, 1800 W

Mitre Drop Table Saw Ryobi EMS 210A 2100mm (D) blade

Core Cutter Mounted on Roller Bench, Approx 1800mm core capacity, 415v

Forklift Jib, East West Engineering

Forklift Man cage, East West Engineering

Mig Welder UniMig Workshop Series 400S With KT50 remote wire feeder

Mig Welder UniMig Workshop Series 345S With KT50 remote wire feeder

Tig Inverter Welder UniMig 200 AC/DC Tig

Mig Welder CigWeld Weld Skill 250 Mig with Cigweld 4R Wire feeder

Mig Welder CigWeld Weld Skill 250 Mig, No wire feeder

Mig Welder Gigweld Weld Skill 250 mig, On mobile trolley base

Inverter Welder Riland ZX7 200

Plasma Cutter Thermal Dynamics

Pressure Washer Blue Ocean 381

Engineers Benches

Assorted Lifting Equipment

Warehousing, Office & IT Equipment

Assorted Yellow Metal Fabricated Stock Racks

H/D A Frame Steel Stock Racks

Assorted Bays Pallet Racking Dexion

Assorted Workshop Benches & Shelving

Mobile Trolleys & Stands

Strapping Systems

Flammable Liquids Cabinets

Reception Counter Timber fabricated with top glass display drawer,Inbuilt power and data points approx 3000 x 800mm and under storage with quantity of rear storage cabinets

Reception Sofa 3 piece 6 in blue suede fabric with chrome metal legs

Board Room Table, Boat shaped, Dark timber 2 Piece, Approx 3200 x 1500mm with leather inlays

22 x Board Room Armchairs High back black leather gas lift on castors

Office Armchairs Avanti High back gas lift on castors

Board Room Table Open centre Rectangular shape, Timber laminate finish, Approx 6200 x 3100mm overall dimensions

Mobile Whiteboard 1200 x 1500

Data Projector Epson EH-TW450 H/D Ready

Notebooks, PC’s, Monitors

Corner Computer Work Stations

Typist Chairs

Reception Tub Chairs

Potted Plants

14 Person Office Workstation

BUYERS PREMIUM

All Assets in this sale will be subject to a 16.5% Buyers Premium Including GST

Bid Price $100 Inc GST + 16.5% Buyers Premium = $116.50 Inc GST

ADMINISTRATORS' SPECIAL TERMS & CONDITIONS

The Assets are sold by Barry Kogan and Shaun Fraser (the “Administrators”) in their capacities as joint and several voluntary administrators of William Enterprise Group Pty Limited, William Enterprise Holdings Pty Limited, William Enterprise Trading Pty Limited, William Powdercoating & Fabrication Pty Limited and Eversure Fencing Pty Limited (all administrators appointed) (together, “the Companies”)

The Administrators make no representations or warranties whatsoever in relation to the Assets.  Clause 13.1 of Tiger Asset Group’s ‘Auction and Website Terms and Conditions’ applies mutatis mutandis as if the reference to Tiger Asset Group in that clause is to Tiger Asset Group, the Companies and the Administrators.

 

By entering into a Sale Agreement to purchase the Assets from the Companies, the Purchaser irrevocably acknowledges and agrees that:

 

(a)        the Administrators have caused each Company to enter into that Sale Agreement in their capacity as Administrators of the relevant Company, and in no other capacity;

(b)        the Administrators are not liable to pay, perform or satisfy any obligations under the Sale Agreement, and have no liability to the Purchaser; and

(c)        the Purchaser waives its rights (if any) and releases the Administrators from all personal liability under or in connection with any Sale Agreement.

TERMS & CONDITIONS

For the full TIGER ASSET GROUP Returns Policy, Privacy Policy, Terms and Conditions, please refer to http://tigerassetgroup.com/sale-calendar/

Assets in this sale are sold “As is where is With all faults if any”

WHS:

Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports) will be available onsite with the assets being sold. The attached Plant Hazard Report is provided for all generic hand and power tools along with office IT equipment. Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts. TIGER ASSET GROUP advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice.

 

Note: Persons under the age of 18 years will not be permitted onsite.

Tradespeople eg; electricians, plumbers, refrigeration mechanics etc will be required to produce the relevant licence before commencing work on site. Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.

It is a condition of entry to site that all visitors comply with any directions given by TIGER ASSET GROUP staff or their representatives.

Work carried out on this site must be completed in a manner compliant with all Workplace Health & Safety legislation.

All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.

TIGER ASSET GROUP will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)

The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.

Enclosed footwear must be worn onsite – Safety boots will be required at industrial sites.

Entry to third party sites will be subject to the site controllers specific site requirements.

Removal of some Items in this sale will require the satisfactory completion of a Safe Work Method Statement by the buyer / buyers representative prior to decommission and removal being undertaken. A copy of TIGER ASSET GROUP’s  Safe Work Method Statement Template can be found HERE.

COLLECTIONS

Customer Pickup:

DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY

To collect your purchases, please ensure bring a copy of your winners email or invoice as well photo ID. On the basis you send a third party to collect your goods on your behalf, you will need to send them with a copy of your winners email or invoice, a copy of your photo ID and a signed document authorising to release the goods.

 

Collection Timeframe:

Wednesday 1st June 2016 8am to 4pm (AEST)

Thursday 2nd June 2016 8am to 4pm (AEST)

Friday 3rd June 2016 8am to 4pm (AEST)

Monday 6th June 2016 8am to 4pm (AEST)

Tuesday 7th June 2016 8am to 4pm (AEST) Unless advised in the Lot Description.

Any items not collected within this period, will be deemed abandoned and resold or otherwise disposed of at the cost to the registered buyer.